Solar and battery installation in Leppington

Leppington sits across two council areas and carries some of the largest residential systems on Crown Solar's record. Postcode 2179 moved to flexible exports on 2 November 2026.

Solar in Leppington: the largest residential systems on the record

Leppington accounts for ten completed Crown Solar installations, and six of them carry a recorded system size. The median Leppington system is 14.8kW, across a range from 10.4kW to 22kW.

That median is the highest of any suburb on this site, and the bottom of the Leppington range sits above the median of several other suburbs entirely. This is not a sales pattern. It is the land. Leppington was released out of semi-rural holdings and a good share of its properties are larger than the Sydney norm, with the roof area and the household load to match. Three-phase supply is more common here than in a tight estate subdivision, and under flexible exports that matters directly, because the allowance applies per phase.

10completed Crown Solar installations in Leppington
Live nowflexible exports have applied to postcode 2179 since 2 November 2026

Your grid connection: Endeavour Energy, postcode 2179

Leppington is in the Endeavour Energy distribution area. Endeavour approves the connection and sets the export limit; your retailer does neither.

Where 2179 sits in Endeavour's rollout

Endeavour stages flexible exports by postcode, not by council.

  1. Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. Postcode 2179 is in this stage
  2. Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
  3. Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address.

What you may export, by connection type

Endeavour Energy, kilowatts per phase.

Export allowance by connection type A flexible export connection allows up to 10kW per phase most of the time. The Fixed Exports opt-out allows a maximum of 1.5kW. Flexible export 10kW Fixed export 1.5kW
A flexible export connection allows up to 10kW per phase, most of the time. The network reduces that only when local grid conditions require it. The Fixed Exports opt-out allows a maximum of 1.5kW. Both carry the same connection requirements.

Flexible exports already apply in 2179

Postcode 2179 is in the first stage of Endeavour's flexible exports rollout, which commenced on 2 November 2026, covering postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. For Leppington this is already the live arrangement rather than something coming later.

A flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions require it. On a three-phase Leppington property that headroom is substantial, and it is the strongest argument for sizing an array here against the roof and the household load rather than against an older fixed cap.

The opt-out is Endeavour's Fixed Exports plan with a maximum export of 1.5kW, carrying the same connection requirements. On an array at the top of the local range that would waste a great deal of generation for no corresponding saving.

What your system has to meet, and the one to check on a large block

Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.

On a larger Leppington property the internet requirement is the one that catches people. The switchboard and the likely inverter position can be a long way from the house and the router, and coverage at the back door is not coverage at the meter box. Under the earlier trial terms a dropped internet connection meant the export limit fell back to the lower fixed figure until it returned. Checking signal at the actual inverter location is part of a proper assessment here, not an optional extra.

The NSW CER Installer Portal and the emergency backstop

The NSW CER Installer Portal is becoming mandatory for all new and upgraded consumer energy resource systems, so they are emergency backstop enabled and able to communicate with network utility servers over the internet. The rollout is staged by postcode alongside the export changes, and 2179 is in the first stage.

The emergency backstop mechanism lets the network curtail exports when the grid cannot absorb what is being sent into it. Endeavour describes it as a last resort used rarely and briefly.

Two councils, one suburb

Leppington is unusual on this site in spanning a council boundary. The bulk of the suburb sits in Camden Council's north ward, while the north-western part falls within the City of Liverpool. Which one applies to your lot is a question of where the line runs, not of which address you give.

For most rooftop installations it makes no practical difference, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and needs no development application from either council. The exemption is conditional. A capacity limit and a restriction on street-facing panels are among the conditions, and a proposal outside them requires development consent, at which point the council boundary becomes a live question.

It matters more on the larger and more rural lots, where two further checks apply: bushfire-prone land mapping, and whether a ground-mounted array rather than a roof-mounted one is being contemplated, which is a different planning question altogether. Crown Solar confirms the lot and the responsible council before finalising a quote.

What Leppington properties mean for system design

Three-phase supply. Where a property is on three phases, the flexible export allowance applies per phase, which changes the sizing arithmetic and the inverter selection alike. Confirm the supply type before comparing quotes, because a quote built on a single-phase assumption for a three-phase property is not a comparable quote.

Rooftop solar panels on a home in New South Wales
Illustrative. The usable north and west area is normally smaller than the roof looks from the street.

Outbuildings and sub-boards. Sheds, granny flats and workshop supplies are common on the larger blocks. They affect inverter placement, cable runs, and sometimes whether a sub-board needs work. They also tend to explain a consumption profile that looks strange on paper.

Roof area is rarely the limit. On many Leppington properties the constraint is the connection rules and the budget rather than available space, which makes it easy to be sold more panels than the load justifies. The twelve-month bill is the check, and the fact that the local median is already 14.8kW is not a reason for yours to be.

Batteries in Leppington

Storage appears across the Leppington jobs, including batteries added to properties that already had panels. On a large property with a significant evening load and good daytime export, the case tends to be stronger than average, but it is still a case to be made from your own data rather than assumed from the suburb.

A wall-mounted residential home battery beside a switchboard
Illustrative. Capacity is sized against evening and overnight use, not against the size of the array.

Where a property has a pump, a workshop or any sizeable motor load, the battery conversation has to cover what the inverter can actually start, not only how many kilowatt hours it holds. That is a technical question worth asking explicitly, and it is a common omission in quotes written for rural-fringe properties by people who have not visited one.

The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time, so Crown Solar states the figure that applies to your quote in writing rather than publishing one here.

What the installation actually involves

  1. Site assessment. Roof orientation and shading, single or three-phase supply, switchboard and any sub-boards, inverter position, and internet coverage at that position.

  2. Design and quote. Array layout by roof face, equipment selection, and the export arrangement that applies to your connection.

  3. Connection application to Endeavour Energy. Work does not begin before the Permission To Connect letter is in hand.

  4. Installation. A standard residential job is a day; a larger three-phase array with storage and sub-board work runs longer.

  5. Commissioning, metering and handover paperwork.

Find out what your roof can carry

Postcode 2179 is in Endeavour's first stage. A connection applied for now gets the flexible export limit, not the fixed one.

Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.

Common questions about solar in Leppington

Which council do I deal with?

Camden for most of the suburb, Liverpool for the north-western part. For an exempt development installation you deal with neither, but the answer matters if your proposal falls outside the exemption.

The local median is 14.8kW. Should mine be that big?

Only if your roof and your bill say so. The Leppington median is high because the properties are large, not because large systems are automatically better value.

Can panels go on the shed instead of the house?

Often, and on a Leppington property the shed is sometimes the better roof. It depends on the structure, the supply arrangement and the cable run, all assessed on site.

What to check in any Leppington quote

Three things decide whether two Leppington quotes are actually comparable, and none of them is the headline price.

  • Which supply has been assumed. Single phase and three phase give different export allowances under flexible exports, because the allowance applies per phase. A quote that has not established your supply type has not established the most important input to the design.
  • Which council the lot falls in. Camden for most of the suburb, Liverpool for the north-west. It makes no difference to an exempt development installation, and all the difference if yours falls outside the exemption.
  • Where the inverter is going, and whether the internet reaches it. On a large block this is the most commonly missed item, and it is the one that quietly determines whether you keep the flexible export allowance.

It is also worth asking for the layout drawing rather than the kilowatt figure alone. Two quotes can show the same system size and quite different expected output if one has put panels on a face the other avoided.

After the installation

You should receive a Certificate of Compliance for Electrical Work confirming the system was installed and tested safely, along with your monitoring details and the paperwork for the small-scale certificates. Keep all of it: a buyer's conveyancer will ask for it, and so will anyone doing warranty work in five years.

On a rural-fringe property it is worth agreeing at handover what the monitoring should normally look like, so a fault is something you notice in a week rather than at the next bill. Ongoing servicing and fault attendance are covered on the maintenance page.

Talk to Crown Solar about your Leppington property

Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, open Mon–Fri 9am–5pm.

Call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form.

Get it in writing for your Leppington address

Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.

Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?

Want this checked against your own roof and bill?

Get a free, no-obligation quote