Solar and battery installation in Prestons

Prestons is houses and warehouses on the same postcode, and flexible exports have applied in 2170 since 2 November 2026. The two kinds of roof are quoted quite differently.

Solar in Prestons: houses and warehouses on one postcode

Prestons accounts for six completed Crown Solar installations. The suburb pairs an established residential area with a substantial industrial estate, and the two are genuinely different work rather than the same work at different scales.

The industrial side is concentrated in the warehouse and factory-unit streets off Hoxton Park Road. Jedda Road, Whyalla Place, Bernera Road and the surrounding business park development, which continues to add units. A roof there is assessed for structure, supply arrangement and load profile before anything is mounted. A house a few streets away is assessed for roof faces, shading and switchboard age.

Where a system size is recorded on the Prestons jobs, the two figures on file are 14.5kW and 18.5kW. Both sit toward the upper end of residential sizing, which is consistent with a suburb where three-phase supply is reasonably common, but two records cannot be turned into a local norm and this page does not try.

6completed Crown Solar installations in Prestons
Live nowflexible exports have applied to postcode 2170 since 2 November 2026

Your grid connection: Endeavour Energy, postcode 2170

Prestons is in the Endeavour Energy distribution area. Endeavour approves the connection and sets the export limit, whether the property is a factory unit or a house. Your electricity retailer does neither.

Where 2170 sits in Endeavour's rollout

Endeavour stages flexible exports by postcode, not by council.

  1. Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. Postcode 2170 is in this stage
  2. Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
  3. Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address.

What you may export, by connection type

Endeavour Energy, kilowatts per phase.

Export allowance by connection type A flexible export connection allows up to 10kW per phase most of the time. The Fixed Exports opt-out allows a maximum of 1.5kW. Flexible export 10kW Fixed export 1.5kW
A flexible export connection allows up to 10kW per phase, most of the time. The network reduces that only when local grid conditions require it. The Fixed Exports opt-out allows a maximum of 1.5kW. Both carry the same connection requirements.

Flexible exports already apply in 2170

Postcode 2170 is named in the first stage of Endeavour's rollout, which commenced on 2 November 2026 and covers postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. For Prestons this is the current arrangement, not a future one.

A flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions require it. The per-phase basis matters more in Prestons than in most suburbs, because a three-phase industrial unit and a single-phase house on the same postcode are working with quite different allowances.

The opt-out is Endeavour's Fixed Exports plan with a maximum export of 1.5kW, carrying the same connection requirements. On any sizeable array that is a severe limitation rather than a simplification.

What your system has to meet

Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.

Larger systems carry a further consideration. Streamlined approval pathways apply up to certain inverter capacity thresholds, and above those a proposal can require a more detailed network assessment, which takes longer and may carry a cost. For a warehouse roof in Prestons that timeline belongs in the project plan from the beginning, because discovering it after equipment has been ordered is an expensive way to learn it.

The NSW CER Installer Portal and the emergency backstop

The NSW CER Installer Portal is becoming mandatory for all new and upgraded consumer energy resource systems up to 200kW, so that they are emergency backstop enabled and able to communicate with network utility servers over the internet. The rollout is staged by postcode alongside the export changes, and 2170 is in the first stage.

The emergency backstop mechanism allows the network to curtail exports when the grid cannot absorb what is being sent into it. Endeavour describes it as a last resort, expected to be used rarely and for short periods.

Two kinds of job in one suburb

Residential Prestons

The housing here is largely established, and the recurring questions are the familiar ones for a suburb of that age: usable roof faces rather than total roof area, winter shading from mature planting, and switchboard work that should be identified and priced before you sign rather than raised on installation day.

Where a property is on three phases, the flexible export allowance applies per phase, which changes the sizing arithmetic and also affects which inverters are suitable. Confirm the supply type before comparing quotes.

Commercial and industrial Prestons

A commercial assessment covers four things a residential one does not, and skipping any of them is how a project goes wrong.

Roof structure. Nothing is mounted before the structural capacity of the roof is established, and on a mixed-age industrial estate the answer is not always yes.

The supply arrangement. Three-phase supply, the switchboard and the available capacity all shape what can be installed and how it connects.

The daytime load profile. A commercial array is sized against what the site actually uses during generating hours, not against the available roof area. A roof that could hold 150kW does not mean a 150kW system is the right answer.

Demand charges. On many commercial tariffs the demand charge matters as much as consumption, and solar alone does not necessarily reduce it. A system can cut consumption charges substantially and leave the demand charge almost untouched. Whether storage changes that depends on your tariff and your load shape, and it is a question your own interval data answers. It is worth insisting on a straight answer rather than an assurance. The commercial solar page covers how these projects are scoped.

Batteries in Prestons

Storage features in the Prestons record, including larger installations on properties with the load to use them.

A wall-mounted residential home battery beside a switchboard
Illustrative. Capacity is sized against evening and overnight use, not against the size of the array.

For a house the sizing rule is the usual one: a battery is sized against evening and overnight consumption, not against the array, and the last twelve months of bills answer that better than any rule of thumb. A smaller battery that is actually cycled every day beats a large one that is rarely emptied.

For a commercial site the logic is different again, because the question is often about demand management and load shifting rather than simply storing surplus. Whether it succeeds depends on the tariff and the shape of the load rather than on the size of the battery, and that should be answered from your interval data before anything is specified.

The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism and steps down over time, so Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.

Approvals: Liverpool City Council and the NSW planning rules

Prestons is in the Liverpool City Council area. Most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021, requiring no development application where every condition is met, including a capacity limit and a restriction on street-facing panels.

That capacity limit is why the exemption frequently does not reach the industrial side of this suburb. A commercial array above the threshold is assessed on its own terms, and the approval path is part of the project rather than an afterthought. For a house the ordinary exempt development position generally applies, and Crown Solar checks the lot before finalising a quote either way.

What the installation actually involves

Rooftop solar panels on a home in New South Wales
Illustrative. The usable north and west area is normally smaller than the roof looks from the street.
  1. Site assessment. For a house: roof type and condition, usable faces, shading, switchboard, and any existing system. For a commercial roof: structure, supply, metering and the daytime load profile.

  2. Design and quote. Layout, equipment selection, and the export arrangement that will apply to the connection.

  3. Connection application to Endeavour Energy. Work does not start before approval. Larger systems may require a more detailed network assessment first.

  4. Installation. A house is typically a day. A commercial roof is scheduled as a project.

  5. Commissioning, metering and handover paperwork.

Find out what your roof can carry

Postcode 2170 is in Endeavour's first stage. A connection applied for now gets the flexible export limit, not the fixed one.

Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.

Common questions about solar in Prestons

Will solar reduce the demand charge on my commercial bill?

Not necessarily, and anyone who promises it will without seeing your tariff and load profile is guessing. It is a question the assessment answers with your actual interval data.

My property is on three-phase. Does that change anything?

Yes, and in your favour under flexible exports, because the allowance applies per phase. It also affects which inverters are suitable, so confirm the supply type before comparing quotes.

Will an 18kW system suit my house?

It might, but not because two local jobs were that size. A house is sized from its own bill, and a quote that lands at the top of the local range without reference to your consumption is not being designed.

What a Prestons system actually looks like

Two of the six Prestons jobs carry a recorded system size, at 14.5kW and 18.5kW.

Two records cannot produce a median or a meaningful range, so this page publishes neither. What those two figures do suggest is that local systems have tended toward the larger end, and the likely reason is the frequency of three-phase supply in a suburb with industrial land in it. That is context, not a benchmark.

Panels

The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range. On a large industrial roof a higher-wattage module reduces the panel count, the rail metres and the labour for a given output, which matters more at 100kW than at 6kW.

On the local record, AE Solar and Jinko Solar both appear on the Prestons roofs on file, from the earlier years of this work. AE Solar is the one to raise where part of a roof is shaded, since its hot-spot-free construction holds output better when one section is in shade. Crown Solar also installs JA Solar, Jinko, AE Solar and LONGi panels.

Inverters and storage

FoxESS accounts for the recorded inverters and batteries on the Prestons jobs. Crown Solar also installs Sungrow, Fronius, GoodWe and SAJ inverters, and Tesla Powerwall, Sigenergy and AlphaESS batteries. Those are the current range, available on any job, not a list of what has been fitted locally.

On a commercial roof the inverter decision is bound up with the supply arrangement and the network application rather than being a preference, and it should be settled as part of the design rather than chosen from a catalogue. On a house it is mostly about efficiency, monitoring and whether a battery can be added later. None of these should be confirmed as suiting your property before someone has assessed it.

Talk to Crown Solar about your Prestons property

Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, open Mon–Fri 9am–5pm.

For commercial enquiries the direct address is commercial@crownsolar.com.au. Otherwise call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form.

Get it in writing for your Prestons address

Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.

Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?

Want this checked against your own roof and bill?

Get a free, no-obligation quote