What a solar site assessment actually looks at

Six things decide what can go on your roof, and none of them are visible from a phone call. Here is what gets checked, and what to have ready.

Every solar company gets the same first question, and most of them answer it: roughly what would it cost? Crown Solar does not, and the reason is not caginess. It is that the answer moves, sometimes a long way, once somebody has stood on the roof and opened the switchboard.

So here is what that visit involves, written out, so you know what you are agreeing to when you book one.

Why a phone number is always the wrong number

A phone quote is built on two things: the suburb and the size of your bill. Neither of them tells anyone whether your roof faces the right way, whether the frames will take the load, or whether your switchboard has room for another circuit. A design built on your own site data is a different document to a price built on a postcode.

The practical difference is that the second one changes on install day, and you find out then.

What the assessor is actually looking at

The roof itself

Material first. Tile and metal are fixed differently, take different mounting hardware and take different amounts of time. Pitch and orientation decide how much of the day an array is working. Age matters too. Putting panels over a roof that is due for replacement means paying to take them off and put them back.

Access, and the second storey

Height, the pitch underfoot and what sits around the building all change how the crew can work and what fall protection the job needs. A single-storey tin roof with a clear yard and a double-storey tile roof hard against a boundary fence are not the same job, whatever the two systems have on the nameplate.

Shade, and when it happens

Not just whether there is shade. Where it falls and at what time of year. Panels wired together in a string share a current path, so which panels go on which string is a design decision, and it is made after somebody has seen the chimney, the neighbour's gum tree and the air-conditioning unit on the ridge.

The switchboard and the meter

This is the one that catches people. The assessor is looking for room for the new circuit, the condition of what is already in there, whether the supply is single or three phase, and whether anything in the board is due for attention regardless of the solar. Metering is arranged through your electricity retailer rather than by the installer, so if your meter needs changing, that is a separate thread to start early.

The network, and who it is

The connection has to be approved by the network that owns the poles and wires at your address. Ausgrid, Endeavour Energy or Essential Energy across New South Wales, and Evoenergy in the ACT. They do not all set the same limits on system size or export, so the boundary your design has to sit inside depends on which one you are behind.

What you use, and when

A bill total is a starting point, not an answer. Usage spread across the day, usage concentrated in the evening and usage that disappears for three months a year all point at different systems. If you are weighing up storage, this is the conversation that decides it, not the brochure. Our battery page covers what we install.

What happens if it is a unit, a townhouse or a strata property

The roof is usually common property, which means the owners corporation decides, not the lot owner. That is a longer path and it is worth starting before the design, not after. Say so on the first call and nobody wastes a visit.

What you get at the end

A written proposal, built on what was measured, that you take away and compare. Any figure in it carries the assumptions it was built from underneath it, your bill, your usage pattern and your tariff, so you can argue with the assumptions rather than with the number. That is the whole point of doing it this way.

What it will not contain is a promise that your bill goes to zero, or a claim that you qualify for something. Eligibility for any rebate or loan programme is confirmed in writing by a person, after the assessment, never on the phone beforehand.

What to have ready

  • A recent power bill. The full one, including the usage graph on the back page.
  • Whether you own the place, and whether there is strata involved.
  • Any panels already up there, and roughly when they went on.
  • Whether the switchboard has been touched in the last decade.
  • What actually made you look into it now. It changes the recommendation more than anything else on this list.
New to all of this? The Learning Centre covers how rooftop solar works and how the rebate is calculated, and the rebate page has a calculator for the upfront certificate discount. Crown Solar is a New Energy Tech Approved Seller and holds NSW electrical contractor licence 378172C.

Want this checked against your own roof and bill?

Get a free, no-obligation quote