Solar and battery installation in Gregory Hills
Gregory Hills is new housing beside a working business park, and the Crown Solar record here is panels without storage. Postcode 2557 has had flexible exports since 2 November 2026.
Solar in Gregory Hills: panels now, storage not yet
Gregory Hills accounts for eight completed Crown Solar installations, and the record here is distinctive for what it does not contain. Across the Gregory Hills jobs on file, none carries a recorded battery. In a corridor where neighbouring suburbs are busy adding storage to arrays fitted a few years ago, this is a suburb still at the panels stage.
There is a straightforward reason. Gregory Hills is a recent master-planned release, so most of its housing, and most of its solar, is new. Households here have not yet reached the point where they have years of data and a clear view of their evening load, which is the point at which the storage conversation usually becomes concrete.
That makes one decision unusually important in this suburb, and it is a decision being made right now by people who think they are only buying panels: whether the inverter you install today will accept a battery later. Get that wrong and adding storage in three years means replacing the inverter as well.
Where a system size is recorded, the Gregory Hills figures run from 9.8kW to 17.2kW, which is a solid mid-to-upper range reflecting new homes with good roof planes and, on a number of lots, three-phase supply.
Your grid connection: Endeavour Energy, postcode 2557
Gregory Hills is in the Endeavour Energy distribution area. Endeavour approves the connection and sets the export limit. Your electricity retailer does neither.
Where 2557 sits in Endeavour's rollout
Endeavour stages flexible exports by postcode, not by council.
-
Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. Postcode 2557 is in this stage
-
Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
-
Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address.
What you may export, by connection type
Endeavour Energy, kilowatts per phase.
Flexible exports already apply in 2557
Postcode 2557 is named in the first stage of Endeavour's rollout, which commenced on 2 November 2026, covering postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. For Gregory Hills this is the current arrangement.
A flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions require it. From November 2026 it is Endeavour's default connection option for eligible new and upgraded solar systems.
The opt-out is Endeavour's Fixed Exports plan, with a maximum export of 1.5kW, carrying the same connection requirements. Given the system sizes typical of this suburb, that cap would leave a great deal of generation unexported.
What your system has to meet
Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.
In a suburb this new the internet requirement is rarely the obstacle. The requirement worth attending to is the inverter itself, and not only for compliance today. An inverter that is CSIP-AUS approved and hybrid-ready is the one that leaves your options open; an inverter chosen purely on price is the one that closes them.
The NSW CER Installer Portal and the emergency backstop
The NSW CER Installer Portal is becoming mandatory for all new and upgraded consumer energy resource systems, so that they are emergency backstop enabled and able to communicate over the internet with network utility servers. It is introduced across NSW in stages by postcode, in step with the export changes, and 2557 is in the first stage.
The emergency backstop mechanism allows the network to curtail exports when more solar is being exported than the grid can absorb. Endeavour describes it as a last resort expected to be used rarely and for short periods.
What Gregory Hills properties mean for system design
Good roofs, finite faces. New estate homes here generally present clean, unshaded planes, which makes the design straightforward. The constraint is which faces are worth using rather than the total roof area, and an honest layout puts panels where they generate rather than filling every plane to reach a headline number.
Three-phase supply is common. Where a property is on three phases the flexible export allowance applies per phase, which materially changes the sizing arithmetic. This is worth confirming before you compare quotes, because a quote built on a single-phase assumption for a three-phase property is not comparing like with like.
Modern switchboards. Unlike the older suburbs on this site, switchboard upgrades are rarely needed in Gregory Hills. That removes a common cost variation, and it means a quote here should be unusually close to the final figure.
The business park next door. Gregory Hills includes a substantial business and industrial precinct alongside the housing, and a commercial roof there is a different exercise altogether: roof structure, three-phase arrangement, the daytime load profile the array is sized against, and demand charges on the bill, which solar alone does not necessarily reduce. The commercial solar page covers how those projects are scoped, and they are quoted as commercial rather than scaled up from a residential price.
Batteries in Gregory Hills
There is no local battery record to report here, and this page is not going to invent one. What can be said is the part that matters while the suburb is young.
A battery is sized against evening and overnight consumption, not against the array. If your system is new, you do not yet have the data to answer that well, which is a genuine argument for waiting a year rather than a reason to be talked into storage at the point of sale.
What should not wait is the inverter decision. Adding storage later is treated as an upgrade and brings the connection under the current requirements, including a CSIP-AUS approved inverter. If the inverter you install now is hybrid-ready and compliant, a battery later is an addition. If it is not, a battery later is a replacement plus an addition.
The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.
Approvals: Camden Council and the NSW planning rules
Gregory Hills falls within Camden Council, whose own administrative centre sits a few minutes away at Oran Park. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.
The exemption applies only where every condition is met, including a capacity limit and a restriction on panels facing the street. That street-facing condition arises more often in a new estate than people expect, because estate homes frequently present their best unshaded plane toward the road. Where a proposal falls outside the conditions, development consent is required instead, and larger arrays on the business park side commonly sit outside the residential exemption altogether.
What the installation actually involves
Site assessment. Roof orientation and usable faces, shading from neighbouring homes, single or three-phase supply, meter position and inverter location.
Design and quote. Layout by roof face, equipment selection with the battery question considered even if you are not buying storage now, and the export arrangement for your connection.
Connection application to Endeavour Energy. Nothing is installed before the Permission To Connect letter arrives.
Installation. Most Gregory Hills residential jobs are a single day.
Commissioning, metering and handover paperwork.
Find out what your roof can carry
Postcode 2557 is in Endeavour's first stage. A connection applied for now gets the flexible export limit, not the fixed one.
Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.
Common questions about solar in Gregory Hills
Should I buy a battery with the system or later?
Either is defensible. If your consumption data is thin, waiting is reasonable. What is not reasonable is installing an inverter that forecloses the choice, so ask specifically whether the proposed inverter is hybrid-ready and CSIP-AUS approved.
My property is on three-phase. Does that help?
Yes, under flexible exports, because the allowance applies per phase. It also affects which inverters are suitable.
Can Crown Solar quote a unit in the business park?
Yes. Commercial work is a separate assessment covering roof structure, supply arrangement, load profile and demand charges, and is quoted as commercial rather than scaled up from a residential price.
What a Gregory Hills system actually looks like
Six of the eight Gregory Hills jobs carry a recorded system size, and the sizes on file run from 9.8kW to 17.2kW.
This page gives the range rather than a median. Six records is the threshold at which a median starts to mean something, but not every one of the six is individually recorded in the detail this site works from, and publishing a median derived from an incomplete list would dress up an estimate as a measurement. The range is what the record actually supports.
What the range does show is that Gregory Hills systems sit toward the upper end of residential sizing, which follows from new homes with good roof planes and frequent three-phase supply. It is not a reason to expect a 17kW quote: your own consumption decides, and a quote that lands at the top of the local range without reference to your bill is not being designed.
Panels
The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range.
On the local record, LONGi appears most on existing Gregory Hills roofs, with Jinko Solar also present, both from the earlier years of this work. Crown Solar also installs JA Solar, Jinko, AE Solar and LONGi panels. AE Solar is the one to raise where part of a roof is shaded, since its hot-spot-free construction holds output better when one section is in shade, though on new estate roofs that is a less frequent problem than in the established suburbs.
Inverters
GoodWe is the inverter that appears most often on Gregory Hills jobs. In a suburb with no battery record yet, GoodWe's hybrid-ready design and broad battery compatibility are doing something specific: they keep the storage decision open rather than settling it at the point of sale.
Crown Solar also installs Sungrow, Fronius and SAJ inverters, and Tesla Powerwall, Sigenergy, FoxESS and AlphaESS batteries. No product should be confirmed as suiting your roof before someone has looked at it. Those are the current range, available on any job, not a list of what has been fitted locally.
Talk to Crown Solar about your Gregory Hills property
Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.
For a quote on a Gregory Hills address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form.
Get it in writing for your Gregory Hills address
Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.
Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?