Solar and battery installation in Bankstown
Bankstown is on Ausgrid, not Endeavour. It also has more apartments and townhouses than most suburbs on this site, so the first question here is often strata rather than sizing.
Solar in Bankstown: the roof may not be yours to decide
Bankstown accounts for three completed Crown Solar installations. Where a system size is recorded, the two figures on file are 13.2kW and 14.1kW, and the record includes a battery of 47.9kWh, which is substantial storage. Two records are not a local figure and this page does not present them as one.
Two things set Bankstown apart from most suburbs on this site, and both come before sizing.
It is on Ausgrid, not Endeavour Energy. The Bankstown jobs on Crown Solar's record that carry a meter identifier show an Ausgrid network prefix. The flexible export dates being discussed everywhere across south-western Sydney, 2 November and 30 November 2026, are Endeavour dates, and they are not Bankstown's. Postcode 2200 is shared with Condell Park and with Bankstown Aerodrome.
And a large and growing share of Bankstown housing is strata. The council's Bankstown City Centre Master Plan, adopted in 2021, concentrates higher-density living around the metro station, and the centre carries a substantial apartment pipeline on top of the townhouse and villa stock already there. If you live in one of those, the roof is not yours, and that changes the whole conversation.
If you are in an apartment, townhouse or villa
This section exists because no amount of good design helps if the decision is not yours to make, and an installer who takes a deposit without establishing that has not done their job.
The roof and the external walls are common property. In a strata scheme they belong to the owners corporation, not to an individual lot owner. So an individual cannot commission a rooftop system over their own unit the way a house owner can. The decision is made by the owners corporation at a general meeting.
What that process involves, in practical terms. A motion goes to a general meeting. Work that alters common property generally needs a special resolution, and where an individual lot owner is to have exclusive use of part of the common property, for instance panels serving only their lot, that normally requires a by-law. Your strata manager will tell you which applies to your scheme. None of this is exotic; it is ordinary strata procedure, and it takes time, which is the part that surprises people.
Then the harder question: whose meter? In most schemes the common property has its own supply for lifts, lighting, pumps and ventilation, separate from each lot's meter. A system connected to that common supply reduces the strata levy for everyone, which is usually the straightforward case and often the one worth doing first. A system intended to serve individual lots is a different and more complicated proposition, because the wiring, the metering and the apportionment all have to be worked out.
A townhouse or villa scheme is usually easier. The roof above your dwelling is typically still common property, so the approval path is the same, but the technical case is simpler because the panels can serve one meter. What settles it is the strata plan, not how the building looks from the street.
What Crown Solar will and will not do. A quote can be prepared for an owners corporation, and the common-property case is worth putting to one. An individual lot owner cannot authorise the work, and we will say so rather than book a site visit. If you are in a scheme, start with your strata manager; it costs nothing and it saves everyone a wasted appointment.
Your grid connection: Ausgrid, postcode 2200
Ausgrid approves your connection and sets your export arrangement. Your electricity retailer does neither.
What is actually happening on Ausgrid
From 23 November 2026 Ausgrid launches the first release of Ausgrid Connect for embedded generation applications, a new system with a new sign-in. Other application types continue through the existing process for the time being.
On exports, Ausgrid offers a choice between a flexible export connection, which permits the maximum export, and a fixed export connection, which is constantly lower. Ausgrid does not publish the kilowatt figures on its connection page and this site will not guess at them. Ask for the limits that will apply at your address in writing as part of the quote.
The NSW-wide requirements, which do apply here
From November 2026, new requirements are being phased in for all new and upgrading solar systems in NSW. A smart solar inverter capable of responding to an emergency backstop, registration in the NSW Government's CER Installer Portal, and an internet connection communicating securely with network systems.
Ausgrid also says plainly to always use a Solar Accreditation Australia (SAA) accredited installer, and that you should receive a Certificate of Compliance for Electrical Work after installation confirming the system was installed and tested safely. Keep it. You will want it when you sell.
The emergency backstop mechanism is a last-resort measure for rare conditions when more rooftop solar is flowing into the grid than can be used, in which the network signals eligible systems to reduce exports briefly. It changes what equipment is acceptable, not whether solar is worth installing.
What Bankstown houses mean for system design
Switchboard age is the recurring cost. Established Canterbury-Bankstown housing commonly needs switchboard attention before a battery, in capacity, protective devices and physical space. It should be assessed and priced before you sign rather than raised on installation day. Two quotes that look far apart frequently differ on exactly this line.
Asbestos in a pre-1990 house is a constraint to plan for. Bonded asbestos cement sheeting was used in Australian housing until the late 1980s, including eaves linings and meter box backing boards. Where it is present it changes how cable is run and who may do that work. It does not prevent an installation; it means the eaves and meter box are inspected during the assessment rather than discovered with a drill.
Overshadowing from new development is a live question here in a way it is not in a low-rise suburb. Where taller buildings are going up nearby, a roof that is clear today may not be in five years. It is worth asking what is permissible on the lots to your north and west before committing to a large array, and it is a reason a modest system plus storage can be the more robust purchase close to the centre.
Mixed roof ages and materials. Terracotta tile, concrete tile and sheet metal all appear, sometimes on one house where an addition has been built. Older tiles are brittle, so the mounting method and the number of tiles lifted matter, and where a roof is close to needing replacement, doing the roof first and the solar second is cheaper than paying to remove and refit an array later.
Winter shading from mature planting. A tree that casts nothing on the roof in January can cover a significant part of an array at nine in the morning in June, because the sun is roughly thirty degrees lower. Shading is assessed for the winter sun path rather than from how the roof looks on the day of the visit.
Batteries in Bankstown
A battery is sized against evening and overnight consumption, not against the size of the array. The local record includes a 47.9kWh battery, which belongs with a large array and a large after-dark load. It is not a benchmark for an average household.
A smaller battery that is actually cycled every day beats a large one that is rarely emptied. Oversized storage is an expensive way to feel prepared.
Where a battery is being retrofitted, the inverter decides most of the cost. Adding storage is treated as an upgrade, which brings the connection under current requirements, so an inverter that cannot respond to the emergency backstop turns an addition into a replacement plus an addition.
In a strata scheme a battery raises further questions about siting, fire separation and access that are properly the owners corporation's to consider, so it belongs in the same motion rather than as an afterthought.
The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.
Approvals: City of Canterbury-Bankstown and the NSW planning rules
Bankstown falls within the City of Canterbury-Bankstown. For most rooftop installations on a house the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.
The exemption is conditional, with a capacity limit and a restriction on panels facing the street among the conditions, and a proposal that does not meet every one of them requires development consent instead. It also carries limits on land with heritage significance, and the council maintains a heritage schedule. On a strata building the planning position is only half the question; the strata approvals above run in parallel and usually take longer. Crown Solar checks the lot before the quote is finalised.
What the installation actually involves
Tenure and title first. House, or strata. In a scheme, who can authorise the work and which supply the system would serve.
Twelve months of consumption. Bills and, where available, interval data split between daytime and after dark.
Site assessment. Roof material, pitch, age and condition, usable faces, winter shading, likely future overshadowing, and the inverter position with its internet coverage.
Switchboard, meter box and eaves. Condition, capacity, and whether pre-1990 sheeting is present.
Design and quote. Layout by roof face, battery sizing against overnight use, and the Ausgrid export arrangement in writing.
Connection application to Ausgrid, submitted by your installer.
Commissioning, metering and handover paperwork, including the Certificate of Compliance for Electrical Work.
Find out what your roof can carry
The design starts with your roof and your own bill, not with a number over the phone.
Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.
Common questions about solar in Bankstown
Should I wait for the November network changes?
No, and the question partly rests on a mix-up: the staged November dates belong to Endeavour Energy, which is not your network. What does apply from November is the NSW-wide equipment and registration requirement, satisfied by using compliant equipment now rather than by waiting.
My owners corporation says it is too complicated. Is it?
The common-property case usually is not. A system on the common supply reduces the levy for every owner and involves one meter and one bill, which is the simplest version of this work. What is genuinely complicated is apportioning generation to individual lots. Those are different proposals and it is worth separating them before the meeting.
What should I ask every installer who quotes me?
Which network they have quoted against, and whether they say Ausgrid. What export limit will apply at your address in writing. And on a strata building, who they say can authorise the work.
What Crown Solar installs here
The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range. On the local record AE Solar is the panel on the Bankstown roofs on file, on more than one of them, from the earlier years of this work. AE Solar is a German-designed panel built for difficult conditions, using hot-spot-free technology that keeps output stable when part of a panel is shaded. Crown Solar also installs JA Solar, Jinko Solar, AE Solar and LONGi panels.
Inverters and storage
FoxESS accounts for the recorded inverters and batteries on the Bankstown jobs.
Crown Solar also installs Sungrow, Fronius, GoodWe and SAJ inverters, and Tesla Powerwall, Sigenergy and AlphaESS batteries. Which one suits depends on whether you want whole-home backup, whether you expect to expand later, and whether you intend to join a virtual power plant, and those are three genuinely different conversations rather than three names for the same product. Those are the current range, available on any job, not a list of what has been fitted locally.
Talk to Crown Solar about your Bankstown property
Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.
For a house at a Bankstown address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form. For an owners corporation or a building's common property, commercial@crownsolar.com.au reaches the commercial team.
Get it in writing for your Bankstown address
Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.
Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?