Solar and battery installation in Blacktown

Blacktown has the largest batteries on the Crown Solar record, and postcode 2148 is in neither of Endeavour's first two export stages. Both facts belong in a quote here.

Solar in Blacktown: big storage, and a later export date

Blacktown accounts for six completed Crown Solar installations, and five of those six carry a recorded system size. One of the better-documented suburbs on this site relative to its job count.

Those five run from 9.7kW to 26.3kW, and the storage figures are the striking part: the Blacktown record includes batteries of around 48kWh and 51kWh, the largest on the whole Crown Solar record. This page is not presenting those as a target. They are what happens on a property with the roof, the load and the budget to justify that capacity, and most Blacktown households will be looking at a fraction of it.

The second fact worth having before you collect quotes is the export timing, and it runs the other way from the Macarthur suburbs. Postcode 2148 is in neither of Endeavour's first two rollout stages.

6completed Crown Solar installations in Blacktown
February 2027Endeavour's published phase for postcode 2148, month only

Your grid connection: Endeavour Energy, postcode 2148

Blacktown is in the Endeavour Energy distribution area. Endeavour approves the connection and sets the export limit for the property. Your electricity retailer does neither, which is why two neighbours on different retail plans face identical connection rules.

Where 2148 sits in Endeavour's rollout

Endeavour stages flexible exports by postcode, not by council.

  1. Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions.
  2. Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
  3. Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address. Postcode 2148 is in this stage

What you may export, by connection type

Endeavour Energy, kilowatts per phase.

Export allowance by connection type A flexible export connection allows up to 10kW per phase most of the time. The Fixed Exports opt-out allows a maximum of 1.5kW. Flexible export 10kW Fixed export 1.5kW
A flexible export connection allows up to 10kW per phase, most of the time. The network reduces that only when local grid conditions require it. The Fixed Exports opt-out allows a maximum of 1.5kW. Both carry the same connection requirements.

Flexible exports have not reached 2148 yet

Postcode 2148 is not in the first stage, which commenced 2 November 2026 and covered postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions, and it is not in the second stage commencing 30 November 2026.

This is worth knowing in Blacktown specifically, because neighbouring Blacktown council postcodes are in different positions. Marsden Park and Melonba in 2765 are named in the second stage and move on 30 November 2026. Blacktown itself is not. One council, two timetables, because the sequencing follows the postcode.

Endeavour's published availability plan lists a third phase in February 2027, and its rollout map is the tool that gives the date for a specific address. This page states no day for 2148 beyond that, because Endeavour has not published a third stage postcode list and a guessed date is worse than no date.

Until the rollout reaches your postcode, the arrangement available is the existing one, with the fixed export limits that go with it. That is not an argument against installing now. Most of the value of a system is in the energy you use yourself rather than the energy you export, but it should be stated plainly in writing on any quote you accept. If a quote for a Blacktown address promises a 10kW per phase allowance from a November date, the installer has looked up the wrong postcode.

When flexible exports do apply, the allowance is up to 10kW per phase most of the time, reduced only when local network conditions require it, with Endeavour's Fixed Exports plan capped at a maximum export of 1.5kW as the opt-out.

What your system has to meet

Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.

Because the export change is still ahead for this postcode, the equipment requirement is the part to get right now. Buying a compliant, hybrid-ready inverter today means the February change is something you benefit from rather than something that strands your system.

The NSW CER Installer Portal and the emergency backstop

The NSW CER Installer Portal is becoming mandatory for all new and upgraded consumer energy resource systems, so that they are emergency backstop enabled and able to communicate over the internet with network utility servers. It is introduced across NSW in stages by postcode, in step with the export changes.

The emergency backstop mechanism allows the network to curtail exports when more solar is being exported than the grid can absorb. Endeavour describes it as a last resort expected to be used rarely and briefly. For a buyer it means one thing: the equipment has to be able to comply.

What Blacktown properties mean for system design

Blacktown is a large, long-established centre rather than a single-era estate, and the housing reflects that: post-war building, 1970s and 1980s brick, later infill, townhouses and apartments around the centre, plus commercial and light industrial pockets.

Rooftop solar panels on a home in New South Wales
Illustrative. The usable north and west area is normally smaller than the roof looks from the street.

Roof and switchboard condition on the older stock. On an older tiled roof the condition of the battens matters as much as the tiles, and if restoration is close it is cheaper before the array than after. Switchboard work is common and should be assessed and priced before you sign rather than raised on installation day.

Mature planting. The established streets have trees with decades of growth, and winter shading is materially worse than summer shading. A layout designed against a single summer visit will underperform for several months a year.

Three-phase supply where it exists. On the larger properties three-phase is reasonably common, and where it exists the flexible export allowance will apply per phase once the rollout arrives. Confirm the supply type before comparing quotes.

Apartments and townhouses. Around the centre, the common roof is an owners corporation decision rather than an individual one. NSW funding for shared solar on apartment buildings exists under the Solar for Apartment Residents program, and it is limited. Confirm the current terms, caps and closing date on the NSW Government program page before counting on it, because the figures and the window both change.

Commercial roofs. Those are a separate exercise covering roof structure, three-phase supply, the daytime load profile and demand charges, which solar alone does not necessarily reduce. The commercial solar page covers how they are scoped, and they are quoted as commercial rather than scaled up from a residential price.

Batteries in Blacktown

Storage is in most of the Blacktown jobs on file, and the local record runs to unusually large capacity, so it is worth being precise about sizing.

A wall-mounted residential home battery beside a switchboard
Illustrative. Capacity is sized against evening and overnight use, not against the size of the array.

A battery is sized against evening and overnight consumption, not against the size of the array. The last twelve months of bills answer that better than any rule of thumb, and for a household with an electric vehicle or a pool the answer can differ sharply from a neighbour's.

The 48kWh and 51kWh systems on the local record are context rather than a benchmark. On a property with the load to cycle that capacity daily it is a sound investment; on a modest household load it is an expensive way to feel prepared. A smaller battery that is actually emptied every day is the better outcome.

Where a battery is being retrofitted to an existing array, the first question is the inverter: whether it is CSIP-AUS approved and whether it is battery-capable. Adding storage is treated as an upgrade, which brings the connection under the current requirements, so a non-compliant inverter turns an addition into a replacement plus an addition.

The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.

Approvals: Blacktown City Council and the NSW planning rules

Blacktown is in the Blacktown City Council area. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.

The exemption applies only where every condition is satisfied, including a capacity limit and a restriction on panels facing the street. The capacity limit is the condition that can bite here, because systems at the top of the local range approach the threshold at which the exemption stops applying. Where that happens, development consent is required instead, and Crown Solar establishes the position before the quote is finalised rather than after.

What the installation actually involves

  1. Site assessment. Roof type and condition, usable faces and winter shading, switchboard and meter box, inverter position and internet coverage at that position, and the make and model of any existing inverter.

  2. Design and quote. Layout by roof face, equipment and battery selection, any switchboard work, and which export arrangement applies given that 2148 is not yet in the rollout.

  3. Connection application to Endeavour Energy. Nothing is installed before the Permission To Connect letter arrives.

  4. Installation. A standard residential job is a day; a large array with substantial storage and switchboard work runs longer.

  5. Commissioning, metering and handover paperwork.

Find out what your roof can carry

The design starts with your roof and your own bill, not with a number over the phone.

Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.

Common questions about solar in Blacktown

Why is Marsden Park ahead of me?

Because the rollout is sequenced by postcode rather than by council. 2765 is named in the second stage and moves on 30 November 2026; 2148 is in neither published stage, and Endeavour's availability plan puts its third phase in February 2027.

Should I wait until February?

Usually not, but you should be told the position rather than left to find it. Most of the value is in self-consumption, so the question is how much of your return depends on export, and that is answered from your own bill.

Someone near me has a 50kWh battery. Do I need one?

Almost certainly not. Those are properties with the load to use that capacity. Your battery is sized from your own evening and overnight consumption.

What a Blacktown system actually looks like

Five of the six Blacktown jobs carry a recorded system size, running from 9.7kW to 26.3kW.

No median is published, because five records cannot support one. A median of five numbers is just the middle number, and with a spread this wide it would describe neither end of the suburb. The spread itself is the useful signal: in a centre with housing from several eras and some commercial-scale roofs, the right system for one property is nothing like the right system for another a few streets away.

Panels

The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range.

On the local record Jinko Solar appears on more existing Blacktown roofs than any other brand, with Eging also present, from the earlier years of this work. Crown Solar also installs JA Solar, Jinko, AE Solar and LONGi panels. AE Solar is the one to raise where mature trees shade part of the roof, since its hot-spot-free construction holds output better when one section is in shade.

Inverters and storage

GoodWe is the inverter that appears most often on Blacktown jobs, with FoxESS next. GoodWe's hybrid-ready design and broad battery compatibility mean storage can be added later without replacing the inverter, which is worth something in a postcode where the export change is still ahead: an inverter bought now should still be the right inverter in February.

Crown Solar also installs Sungrow, Fronius and SAJ inverters, and Tesla Powerwall, Sigenergy, FoxESS and AlphaESS batteries. Which combination suits you depends on whether you want whole-home backup, whether you expect to expand later, and whether you intend to join a virtual power plant, and those are three genuinely different conversations rather than three names for the same product. Those are the current range, available on any job, not a list of what has been fitted locally.

Talk to Crown Solar about your Blacktown property

Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.

For a quote on a Blacktown address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form.

Get it in writing for your Blacktown address

Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.

Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?

Want this checked against your own roof and bill?

Get a free, no-obligation quote