Solar and battery installation in Seven Hills
Every recorded Seven Hills job is solar and a battery installed together rather than a retrofit. There are good reasons for that, and they are worth understanding before you buy either one.
Solar in Seven Hills: the suburb that buys both at once
Seven Hills accounts for four completed Crown Solar installations, and every recorded job here is solar and storage fitted together rather than a battery added to panels that were already on the roof. Across most of the suburbs on this site the pattern is the reverse. Seven Hills is the clearest example of the other approach, and it is worth explaining, because on cost it is usually the better one.
Where a system size is recorded, the three figures on file are 7.0kW, 7.5kW and 11.7kW. Three records are not a local standard and this page does not present them as one.
Seven Hills sits in the Blacktown City Council area on postcode 2147, which it shares with neighbouring suburbs, and the housing is largely established.
Why installing both together usually costs less
This is the section that earns its place here. The reasons are practical rather than promotional, and they are the same reasons a retrofit quote comes in higher than people expect.
One inverter decision instead of two. When solar and storage are designed together, the inverter is chosen from the start as one that is CSIP-AUS approved and suited to the battery. In a retrofit, the inverter already on the wall decides most of the cost: if it is not approved or not battery-capable, adding storage brings the connection under current requirements and the inverter has to be replaced. You then pay for two inverters across the life of the system and use one.
One switchboard upgrade instead of two visits. On established Seven Hills housing the switchboard frequently needs attention before a battery. Doing that once, as part of a single job, is cheaper than doing a solar installation now and bringing an electrician back for the board later.
One connection application and one commissioning. An upgrade needs its own application to Endeavour and its own commissioning and paperwork. Two projects mean two of each.
One lot of access and labour. Scaffolding, roof access and a crew on site are costs that do not halve when the work is split in two.
And the honest counter-argument. Doing both at once is a larger cheque, and for many households cash flow decides the sequence rather than efficiency. That is a legitimate reason to start with solar. If you do, the thing to get right now is the inverter: specify one that is CSIP-AUS approved and battery-capable, with the capacity headroom for the storage you expect to add. That one decision is what makes a later battery an addition instead of a replacement plus an addition. Ask for it explicitly, because a cheaper inverter that closes the door is an easy saving for an installer to make on your behalf.
Your grid connection: Endeavour Energy, postcode 2147
Seven Hills is in the Endeavour Energy distribution area. Endeavour approves the connection and sets the export limit. Your electricity retailer does neither.
Where 2147 sits in Endeavour's rollout
Endeavour stages flexible exports by postcode, not by council.
-
Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions.
-
Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
-
Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address. Postcode 2147 is in this stage
What you may export, by connection type
Endeavour Energy, kilowatts per phase.
Flexible exports reach 2147 in the February 2027 phase
Endeavour has published two rollout stages by postcode. The first commenced on 2 November 2026, covering postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. The second commences on 30 November 2026 and adds a long list of Blue Mountains, Penrith, Hawkesbury and Illawarra postcodes. 2147 appears in neither.
That places Seven Hills in the February 2027 phase of Endeavour's availability plan. Endeavour has published the month, not a date within it, so this page gives the month and nothing more precise. Treat any quote that names a specific February day for 2147 as unsourced.
When it does apply, a flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions require it. The opt-out is Endeavour's Fixed Exports plan with a maximum export of 1.5kW. Until the rollout reaches 2147, an application submitted and approved under the existing process carries a fixed export limit, and that position should appear on your quote in writing.
Where a battery is part of the system, that export limit matters less than it sounds. Storage is about using your own generation rather than sending it out, so a fixed export limit bears on a solar-plus-battery system far less than on an export-heavy array. That is a real argument for the Seven Hills pattern in the months before February 2027, and it is an argument about arithmetic rather than urgency.
What your system has to meet
Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.
The emergency backstop mechanism allows the network to curtail exports when the grid cannot absorb what is being sent into it. Endeavour describes it as a last resort, expected to be used rarely and for short periods. It changes what equipment is acceptable, not whether solar is worth having.
What Seven Hills properties mean for system design
Switchboard age is the recurring cost, and on a combined job it is also the opportunity. Established housing here commonly needs switchboard work before a battery. Priced once, inside a single project, it is a line item. Discovered later, it is a second visit. Either way it should be assessed and priced before you sign rather than raised on installation day.
Asbestos in a pre-1990 house is a constraint to plan for. Bonded asbestos cement sheeting was used in Australian housing until the late 1980s, including eaves linings and meter box backing boards. Where it is present it changes how cable is run and who may do that work. It does not prevent an installation; it means the eaves and meter box are inspected during the assessment rather than discovered with a drill.
Mixed roof ages and materials. Tile and sheet metal both appear, sometimes on one house where an addition has been built. Older tiles are brittle, so the mounting method and the number of tiles lifted matter, and where a roof is close to needing replacement, doing the roof first and the solar second is cheaper than paying to remove and refit an array later. On a combined solar-and-battery job that sequencing question should be settled at quote stage, because the whole project depends on it.
Battery siting is a design decision in western Sydney. Storage has an operating temperature range and a preferred one, and both performance and service life suffer at the top of it. A hot, unventilated garage is a decision with consequences. The same logic applies to the inverter, which reduces its own output when it overheats, so a shaded or ventilated position beats the convenient wall in afternoon sun.
Winter shading from mature planting. Established streets carry substantial garden trees. A tree that casts nothing on the roof in January can cover a significant part of an array at nine in the morning in June, because the sun is roughly thirty degrees lower. Shading is assessed for the winter sun path rather than from how the roof looks on the day of the visit.
Sizing a combined system
When both halves are bought together the sizing exercise has two separate answers, and they come from different numbers.
The array is sized against daytime consumption plus whatever you can usefully export. Until February 2027 that export is capped, which pushes the sensible array size toward what the household actually uses while the sun is up.
The battery is sized against evening and overnight consumption, not against the size of the array. A smaller battery that is actually cycled every day beats a large one that is rarely emptied, and oversized storage is an expensive way to feel prepared.
The split between the two comes from your interval data where you have it. Many retailers provide it on request or through an online portal, and a smart meter makes the daytime and after-dark shares precise rather than estimated. Without it the installer is guessing, and you are entitled to ask which it is.
Decide what backup means to you before the equipment is chosen. Whole-home backup, a selected essential circuit, or no backup at all are three different specifications at three different prices. The same is true of whether you intend to join a virtual power plant. Those decisions narrow the equipment list rather than the other way round.
The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.
Approvals: Blacktown City Council and the NSW planning rules
Seven Hills falls within Blacktown City Council. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.
The exemption is conditional, with a capacity limit and a restriction on panels facing the street among the conditions, and a proposal that does not meet every one of them requires development consent instead. For lots near the creek lines through this part of Blacktown the flood position is worth establishing from council mapping, because it bears on where the inverter, battery and switchboard can safely be sited. Those are the ground-level, water-sensitive parts of the system, and on a combined job there is more of that equipment to place. Crown Solar checks the lot before the quote is finalised.
What the installation actually involves
Consumption first. Twelve months of bills and, where available, interval data split between daytime and after dark, because the array and the battery are sized from different halves of it.
Site assessment. Roof material, pitch, age and condition, usable faces, winter shading, and the positions for inverter and battery chosen for temperature and ventilation as well as cable run.
Switchboard, meter box and eaves. Condition, capacity and space for everything being added at once, and whether pre-1990 sheeting is present.
Equipment selection. An inverter that is CSIP-AUS approved and matched to the storage, with the backup arrangement specified rather than assumed.
Design and quote. Array and battery sized separately and stated separately, any roof or switchboard work itemised, and the export arrangement that applies given the February 2027 phase.
Connection application to Endeavour Energy. Nothing is installed before approval.
Commissioning, metering and handover paperwork.
Find out what your roof can carry
The design starts with your roof and your own bill, not with a number over the phone.
Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.
Common questions about solar in Seven Hills
Should I wait for February 2027?
Generally not, and where a battery is part of the system it matters less again, because storage is about self-consumption rather than export. What you should insist on is the arrangement being stated in writing on the quote.
If I can only afford one, which comes first?
Solar, in most cases, because it reduces the bill from the day it is commissioned and a battery cannot do anything without generation to store. But specify a CSIP-AUS approved, battery-capable inverter with capacity headroom when you do it, so the later addition is an addition.
What should I ask every installer who quotes me?
Whether the inverter is battery-capable and what size battery it will support, where the inverter and battery will be mounted and why, whether the switchboard has been inspected and priced or merely assumed, and what export arrangement applies at your address in writing.
What Crown Solar installs here
The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range. Crown Solar also installs JA Solar, Jinko Solar, AE Solar and LONGi panels. On the local record Jinko Solar, JA Solar, AE Solar and Eging panels all appear on Seven Hills roofs from the earlier years of this work. Four jobs and four different panels, which is what happens when work is spread over several years in a market that changes its product line annually. The panel on your quote is the current one, not the one on a neighbour's roof.
Inverters and storage
AlphaESS accounts for most of the recorded batteries on the Seven Hills jobs, with FoxESS also on file on both the inverter and the storage side.
Crown Solar also installs Sungrow, Fronius, GoodWe and SAJ inverters, and Tesla Powerwall and Sigenergy batteries. Which one suits depends on whether you want whole-home backup, whether you expect to expand later, and whether you intend to join a virtual power plant. On a combined job that choice is made with the design rather than after it, which is part of why the combined approach works out better. Those are the current range, available on any job, not a list of what has been fitted locally.
Talk to Crown Solar about your Seven Hills home
Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.
For a quote on a Seven Hills address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form.
Get it in writing for your Seven Hills address
Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.
Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?