Solar and battery installation in Claymore

Claymore sits in the first stage of the Endeavour Energy flexible exports rollout, live since 2 November 2026. It is also a suburb where who owns the roof decides the question, so this page covers both.

Solar in Claymore: the ownership question comes first

Claymore accounts for nine completed Crown Solar installations. Before any of the usual detail about roofs and export limits, this page has to deal with something that matters more in Claymore than in almost any other suburb on this site: who is entitled to say yes.

Claymore is the subject of the Claymore Renewal Project, a staged redevelopment delivered under a planning agreement between Campbelltown City Council and the NSW Land and Housing Corporation. The renewal area covers approximately 1,151 dwellings, around 98 per cent of which are in public ownership. The concept plan was approved in 2013 and the project has been delivered in stages since, reaching stage six of thirteen by 2025.

For a household in one of those dwellings, solar is not a decision an installer can help with directly, because the decision belongs to the owner. That is worth saying plainly rather than leaving a resident to work it out after a sales call. If you rent in Claymore, the useful step is to raise it with your landlord or housing provider; a quote on the property is something an owner can consider, and Crown Solar is happy to provide one to whoever holds the title.

The renewal is also steadily adding privately owned housing to the suburb, and those are homes where an owner-occupier makes the call in the ordinary way. The rest of this page is written for that reader.

9completed Crown Solar installations in Claymore
Live nowflexible exports have applied to postcode 2559 since 2 November 2026

Your grid connection: Endeavour Energy, postcode 2559

Claymore is in the Endeavour Energy distribution area. Endeavour approves your connection application and sets how much you may export. Your electricity retailer does neither of those things, which is why two neighbours on different retail plans face identical connection rules.

Where 2559 sits in Endeavour's rollout

Endeavour stages flexible exports by postcode, not by council.

  1. Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. Postcode 2559 is in this stage
  2. Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
  3. Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address.

What you may export, by connection type

Endeavour Energy, kilowatts per phase.

Export allowance by connection type A flexible export connection allows up to 10kW per phase most of the time. The Fixed Exports opt-out allows a maximum of 1.5kW. Flexible export 10kW Fixed export 1.5kW
A flexible export connection allows up to 10kW per phase, most of the time. The network reduces that only when local grid conditions require it. The Fixed Exports opt-out allows a maximum of 1.5kW. Both carry the same connection requirements.

Flexible exports already apply in 2559

Postcode 2559 is named in the first stage of Endeavour's rollout, which commenced on 2 November 2026 and covers postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. For Claymore this is the current arrangement, not something to wait for.

A flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions call for it. From November 2026 it is Endeavour's default connection option for eligible new and upgraded solar systems, offered as part of the standard connection process.

The alternative, if you opt out, is Endeavour's Fixed Exports plan with a maximum export of 1.5kW. It carries the same connection requirements, including a compatible inverter and an active internet connection, so opting out buys no simplicity. Only a much lower ceiling.

What your system has to meet

Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.

On the newer Claymore housing the internet requirement is usually straightforward, because the meter position and the inverter position tend to be close to the house. On the older stock it is worth checking at the site assessment rather than assuming, since a connection that works inside the house does not always reach an external meter box.

The NSW CER Installer Portal and the emergency backstop

The NSW CER Installer Portal is becoming mandatory for all new and upgraded consumer energy resource systems, so that they are emergency backstop enabled and able to communicate over the internet with network utility servers. It is introduced across NSW in stages by postcode, in step with the export changes, and 2559 is in the first stage.

The emergency backstop mechanism allows the network to curtail exports when more solar is being exported than the grid can absorb. Endeavour describes it as a last resort expected to be used rarely and briefly. For a buyer it means one thing: the equipment has to be able to comply, because equipment that cannot comply cannot be connected.

What Claymore properties mean for system design

Claymore contains two quite different kinds of housing, and a quote that does not distinguish between them is not being designed.

Rooftop solar panels on a home in New South Wales
Illustrative. The usable north and west area is normally smaller than the roof looks from the street.

The newer renewal housing. Recently built homes here have modern switchboards, well-defined roof planes and, on some lots, three-phase supply. These are straightforward jobs, and the constraint is usually which roof faces are worth using rather than the total area available. Lot sizes in the renewal stages are modest, so roof area is finite and a higher-wattage panel earns its place.

The original estate housing. The dwellings built in the estate's first era are older, and the recurring issues are the familiar ones: switchboard age, roof and batten condition on tiled roofs, and shading from trees that have had decades to grow. Winter shading is materially worse than summer shading, and a layout designed against a single summer site visit will disappoint for several months of the year.

Roof condition before panels. On any older tiled roof, if restoration is within a few years of being needed it is cheaper to do it before the array goes on than to remove and refit panels afterwards. An honest assessment says so even when it delays the sale.

Batteries in Claymore

Storage appears in the Claymore record, though in small numbers. The sizing principle does not change with the suburb: a battery is sized against what you use in the evening and overnight, not against the size of the array, and twelve months of bills answer that better than any rule of thumb.

A wall-mounted residential home battery beside a switchboard
Illustrative. Capacity is sized against evening and overnight use, not against the size of the array.

On a smaller home with a modest load, a smaller battery that is actually cycled every day is a better outcome than a large one that is rarely emptied. Oversized storage is an expensive way to feel prepared.

The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here that would be out of date within months.

Approvals: Campbelltown City Council and the NSW planning rules

Claymore falls within Campbelltown City Council. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.

The exemption is conditional. A capacity limit and a restriction on panels facing the street are among the conditions, and a proposal that does not meet every one of them requires development consent instead. Crown Solar checks the specific lot before a quote is finalised.

Claymore carries one extra consideration. Because the suburb is inside an active renewal area governed by its own planning agreement and staged approvals, it is worth confirming the planning position for a particular lot rather than assuming the general residential position applies. That check costs nothing at quote stage and avoids a problem later.

What the installation actually involves

  1. Confirming who owns the property. In Claymore this is the first step, not a formality, and it determines who Crown Solar deals with.

  2. Site assessment. Roof type and condition, usable faces and winter shading, switchboard and meter box, inverter position and internet coverage at that position.

  3. Design and quote. Layout by roof face, equipment selection, any switchboard work, and the export arrangement for your connection.

  4. Connection application to Endeavour Energy. Nothing is installed before the Permission To Connect letter arrives.

  5. Installation. Most Claymore residential jobs are a single day.

  6. Commissioning, metering and handover paperwork.

Find out what your roof can carry

Postcode 2559 is in Endeavour's first stage. A connection applied for now gets the flexible export limit, not the fixed one.

Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.

Common questions about solar in Claymore

I rent here. Can I have solar installed?

Not on your own decision. The owner decides, and in the Claymore renewal area most dwellings are publicly owned. Raising it with your landlord or housing provider is the step that can actually move it forward.

Does my switchboard need upgrading?

On the older housing it often does, and certainly before a battery. It is assessed before quoting so the figure you are given is the figure you pay, rather than appearing as a variation on installation day.

Is my roof big enough to be worth it?

Usually yes, but the right question is what the roof supports rather than what a brochure suggests. A well-designed 6.6kW system on a good face beats a badly designed 10kW system spread across four mediocre ones.

What a Claymore system actually looks like

Four of the nine Claymore jobs carry a recorded system size. Those four run from 6.6kW to 11.4kW.

This page does not publish a median for Claymore, and the reason is simply arithmetic: a median drawn from four numbers is not a median, it is the middle of a very short list. Quoting one would give a figure more authority than the underlying record can support. What the range does tell you is useful enough on its own. Local systems have clustered in the single-figure to low-teens band, which is consistent with the lot sizes and the roof areas here.

Your own system is sized from your own consumption. A quote that arrives at the same number regardless of the bill in front of it is not being designed, it is being sold.

Panels

The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range. On a modest Claymore roof a higher-wattage module earns its place, because the binding constraint is the number of panels that fit rather than the budget.

On the local record, LONGi appears on more Claymore roofs than any other panel brand, with Jinko Solar second, both from the earlier years of this work. If a quote today names a different panel from the one on a neighbour's roof, the difference is usually the year rather than the quote. Crown Solar also installs JA Solar, Jinko and AE Solar, the last being the one to discuss where mature trees shade part of the roof.

Inverters and storage

GoodWe is the inverter that appears most often on Claymore jobs. Its hybrid-ready design and broad battery compatibility mean storage can be added later without replacing the inverter, which matters in a suburb where a household may well add panels first and storage some years later.

That compatibility also bears on the connection rules. Adding storage is treated as an upgrade, and an upgrade has to meet the current requirements, including a CSIP-AUS approved inverter. Crown Solar also installs Sungrow, Fronius, GoodWe and SAJ inverters, and Tesla Powerwall, Sigenergy, FoxESS and AlphaESS batteries. None of them should be confirmed as suiting your property before someone has looked at it. Those are the current range, available on any job, not a list of what has been fitted locally.

Talk to Crown Solar about your Claymore property

Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, a short run from Claymore, and is open Mon–Fri 9am–5pm.

For a quote on a Claymore address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form. Completed work by suburb is on the projects page.

Get it in writing for your Claymore address

Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.

Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?

Want this checked against your own roof and bill?

Get a free, no-obligation quote