Solar and battery installation in Ermington
Ermington runs down to the Parramatta River, so flood mapping decides where ground-level equipment can go. Endeavour reaches 2115 in February 2027.
Solar in Ermington: a river suburb on a February timetable
Ermington accounts for four completed Crown Solar installations. Where a system size is recorded, the two figures on file are 6.7kW and 14.1kW. Two records are not a local figure and this page does not present them as one, though the spread is worth noting: on the same street pattern, one household's roof and consumption justified roughly twice the system of another's.
Ermington sits in the City of Parramatta and runs down toward the Parramatta River. Two things follow from that, and the second is the one most quotes skip.
The network is Endeavour, not Ausgrid. The Ermington jobs on Crown Solar's record that carry a meter identifier show Endeavour network prefixes. That is worth confirming from your own meter identifier rather than assuming, because the boundary between the two networks runs through this part of Sydney and the two have entirely different export arrangements and timetables.
And the river matters for where the equipment goes, not for whether solar is worth having.
Flood mapping and ground-level equipment
Panels are on the roof. The parts of a solar system a flood reaches are the ones at or near ground level: the inverter, the battery, the switchboard and the isolators. They are also the expensive parts, and the ones that have to be made safe before a house can be re-energised.
So for a lot toward the river or the creek lines feeding it, the flood position is established from council mapping before anything is sited. It is a property-level question rather than a suburb-level one, and it varies considerably across Ermington. Where a lot is affected, mounting height becomes a deliberate decision with consequences for cable runs, service access and sometimes the manufacturer's installation requirements, and it belongs on the quote rather than being improvised on the day.
This applies to a battery retrofit at least as much as to a new installation, because a battery is a larger and harder-to-relocate object than an inverter. If storage is on the table, settle the siting question before choosing the product.
The flood position does not change with the export rollout and will not improve by waiting.
Your grid connection: Endeavour Energy, postcode 2115
Endeavour approves the connection and sets the export limit. Your electricity retailer does neither.
Where 2115 sits in Endeavour's rollout
Endeavour stages flexible exports by postcode, not by council.
-
Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions.
-
Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
-
Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address. Postcode 2115 is in this stage
What you may export, by connection type
Endeavour Energy, kilowatts per phase.
Flexible exports reach 2115 in the February 2027 phase
Endeavour has published two rollout stages by postcode. The first commenced on 2 November 2026, covering postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. The second commences on 30 November 2026 and adds a long list of Blue Mountains, Penrith, Hawkesbury and Illawarra postcodes. 2115 appears in neither, which places Ermington in the February 2027 phase of Endeavour's availability plan. Endeavour has published the month, not a date within it, so this page gives the month and nothing more precise. Treat any quote that names a specific February day for 2115 as unsourced.
When it applies, a flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions require it. The opt-out is Endeavour's Fixed Exports plan with a maximum export of 1.5kW. Until the rollout reaches 2115, an application submitted and approved under the existing process carries a fixed export limit, and that position should appear on your quote in writing.
What your system has to meet
Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.
The emergency backstop mechanism allows the network to curtail exports when the grid cannot absorb what is being sent into it. Endeavour describes it as a last resort, expected to be used rarely and for short periods.
What Ermington properties mean for system design
Housing spans several decades. Post-war brick, later infill and more recent rebuilds and duplexes all appear, so roof material, roof age and switchboard condition have to be established property by property rather than inferred from the suburb.
Switchboard age is the recurring cost. On the older stock a board frequently needs replacement or upgrade before a battery, in capacity, protective devices and physical space. It is assessed and priced before you sign rather than raised on installation day, and on a flood-affected lot its height and position come into the same conversation. Two quotes that look far apart frequently differ on exactly this line.
Asbestos in a pre-1990 house is a constraint to plan for. Bonded asbestos cement sheeting was used in Australian housing until the late 1980s, including eaves linings and meter box backing boards. Where it is present it changes how cable is run and who may do that work. It does not prevent an installation; it means the eaves and meter box are inspected during the assessment rather than discovered with a drill.
River-corridor canopy. The vegetation along the river and the reserves is mature, and a tree that casts nothing on the roof in January can cover a significant part of an array at nine in the morning in June, because the sun is roughly thirty degrees lower. Shading is assessed for the winter sun path rather than from how the roof looks on the day of the visit.
Usable faces, not total roof area. The north and west area that can actually carry panels is normally smaller than the roof appears, and on a duplex or a narrow lot it is smaller again.
Roof condition decides the sequence. Where a roof is close to needing replacement or significant repair, doing that first and the solar second is cheaper than paying to remove and refit an array later. The roof is assessed at quote stage.
Batteries in Ermington
A battery is sized against evening and overnight consumption, not against the size of the array. The useful figure is what the household actually uses after dark, which your bills and meter data answer better than any estimate.
A smaller battery that is actually cycled every day beats a large one that is rarely emptied. Oversized storage is an expensive way to feel prepared.
Where exports are capped until February 2027, storage changes the arithmetic more than extra panels do, because energy you store and use yourself is worth the retail rate you avoid paying rather than the feed-in rate you do not control.
Where a battery is being retrofitted, the inverter decides most of the cost. Adding storage is treated as an upgrade, which brings the connection under current requirements, so an inverter that is not CSIP-AUS approved turns an addition into a replacement plus an addition.
On a flood-affected lot the installation requirements narrow the field before preference does, so establish the siting position first. A battery can carry a household through a short outage, which is worth something, but it is not flood protection and this page makes no claim about how any system behaves in a particular local event.
The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.
Approvals: the City of Parramatta and the NSW planning rules
Ermington falls within the City of Parramatta. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.
The exemption is conditional, with a capacity limit and a restriction on panels facing the street among the conditions, and a proposal that does not meet every one of them requires development consent instead. It also carries limits on land with heritage significance, and the council maintains a heritage schedule. In Ermington the flood mapping described above is the check that matters most. Crown Solar checks the lot before the quote is finalised.
What the installation actually involves
Network and flood position established first, from the meter identifier and council mapping, because together they set the export rules and where equipment can go.
Site assessment. Roof material, pitch, age and condition, usable faces, winter shading from the river corridor, and the inverter position with its internet coverage.
Switchboard, meter box and eaves. Condition, capacity, height, and whether pre-1990 sheeting is present.
The existing system, if there is one. Make, model and age of the inverter, and whether it is battery-capable.
Design and quote. Layout by roof face, battery sizing against overnight use, equipment positions and any required heights stated, and the export arrangement that applies given the February 2027 phase.
Connection application to Endeavour Energy. Nothing is installed before approval.
Commissioning, metering and handover paperwork.
Find out what your roof can carry
The design starts with your roof and your own bill, not with a number over the phone.
Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.
Common questions about solar in Ermington
Should I wait for February 2027?
Generally not. Most of the value of a solar system is in the energy you use yourself rather than the energy you export. What you should insist on is the arrangement being stated in writing on the quote.
Is my lot flood affected?
That is a council mapping question answered for your specific property, not for the suburb, and in Ermington it varies considerably with how far down toward the river you are. Get the answer before you choose a battery.
What should I ask every installer who quotes me?
Which network they have quoted against and how they established it, whether the flood position for your lot has been checked and what it means for equipment siting, and whether the switchboard has been inspected and priced or merely assumed.
What Crown Solar installs here
The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range. On the local record LONGi is the panel on the Ermington roofs on file, on more than one of them, from the earlier years of this work. That distinction is worth having if you are comparing a quote today against what a neighbour had fitted: the panel on your quote is the current one, not the one on their roof. Crown Solar also installs JA Solar, Jinko Solar, AE Solar and LONGi panels.
Inverters and storage
Fronius accounts for most of the recorded inverters on the Ermington jobs, with GoodWe and FoxESS also on file, and FoxESS on the storage side. Fronius is an Austrian-manufactured inverter with a long service history in Australia, and Ermington is the one suburb on this site where it leads the local record.
Crown Solar also installs Sungrow and SAJ inverters, and Tesla Powerwall, Sigenergy and AlphaESS batteries. Which one suits depends on whether you want whole-home backup, whether you expect to expand later, and whether you intend to join a virtual power plant, and on a flood-affected lot the installation requirements come into it as well. Those are the current range, available on any job, not a list of what has been fitted locally.
Talk to Crown Solar about your Ermington home
Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.
For a quote on an Ermington address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form.
Get it in writing for your Ermington address
Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.
Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?