Solar and battery installation in Lurnea

Local systems run from 2.1kW to 17.6kW, a spread of more than eight to one. No average describes that, so this page explains what moves a house across it instead.

Solar in Lurnea: 2.1kW to 17.6kW, and no average worth printing

Lurnea accounts for three completed Crown Solar installations. The two recorded system sizes are 2.1kW and 17.6kW.

That is a spread of more than eight to one. The widest of any suburb on this site. An average of those two numbers would be about 10kW, a figure that describes neither house and would be worse than printing nothing. So this page does not publish one. It explains what actually moves a Lurnea house from one end of that range to the other, which is the question behind "what size do I need".

A word on the 2.1kW figure, since it is striking. It is very small by any current standard, and the record does not say why. It could be a partial installation, an early system, or a deliberately minimal one for a small household. It appears here because it is on the record, not as a model to follow, and not as something to be embarrassed about either.

Lurnea sits about 35 kilometres south-west of the Sydney CBD in the Liverpool City Council area.

3completed Crown Solar installations in Lurnea
Live nowflexible exports have applied to postcode 2170 since 2 November 2026

Who owns the roof

This comes first because for some Lurnea households it settles the matter, and the proportion is worth stating precisely rather than vaguely.

At the 2021 Census, social housing was about 15.8 per cent of Lurnea dwellings. Roughly 399 state housing and 60 community housing dwellings. So this is not a suburb where most roofs are out of the owner's hands; it is one where about one home in six is, which is a different and more useful thing to know.

If you rent, the decision belongs to the owner. For a social housing tenancy that is Homes NSW; for a private rental it is your landlord or the managing agent. Either way the first step is to ask them rather than to collect quotes, because no installer can work on a roof without the owner's authority. If you pay the electricity bill and a system would reduce it, that is a reasonable thing to raise.

If you own your home, the rest of this page is written for you, and the flexible export arrangement already applies to your address.

What moves a Lurnea house from 2kW to 17kW

Four things, roughly in order of how much they matter.

Usable roof, not roof area. Lurnea's housing is largely single-storey detached, which is good for access and safety, and a hip roof of that kind divides into four modest faces. Only the north and west ones are worth using. The usable area is routinely about half what the roof looks like from the street, and on a smaller house it sets the ceiling before the budget does.

Supply arrangement. A single-phase house has a practical ceiling well below 17kW. Above roughly 10kW of inverter capacity, three-phase supply is usually the requirement, and it changes which inverters are suitable too. Whether your property is single or three phase is established before a design is drawn.

What the household actually uses, and when. Electric hot water, ducted air conditioning, a pool pump, people home during the day or an electric vehicle all push the figure up legitimately. Without them, a large array generates energy nobody in the house is awake to use.

What you can do with the surplus. Flexible exports already apply here, which allows up to 10kW per phase to be exported most of the time, so export is less of a constraint in Lurnea than in the suburbs still waiting for February 2027. That genuinely widens the sensible range at the top end.

And one thing that does not belong in the decision. What the neighbours have. Both Lurnea figures on the record are real systems on real roofs, and neither tells you anything about yours.

Your grid connection: Endeavour Energy, postcode 2170

Lurnea is in the Endeavour Energy distribution area. Endeavour approves the connection and sets the export limit. Your electricity retailer does neither.

Where 2170 sits in Endeavour's rollout

Endeavour stages flexible exports by postcode, not by council.

  1. Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. Postcode 2170 is in this stage
  2. Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
  3. Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address.

What you may export, by connection type

Endeavour Energy, kilowatts per phase.

Export allowance by connection type A flexible export connection allows up to 10kW per phase most of the time. The Fixed Exports opt-out allows a maximum of 1.5kW. Flexible export 10kW Fixed export 1.5kW
A flexible export connection allows up to 10kW per phase, most of the time. The network reduces that only when local grid conditions require it. The Fixed Exports opt-out allows a maximum of 1.5kW. Both carry the same connection requirements.

Flexible exports already apply in 2170

Postcode 2170 is named in the first stage of Endeavour's rollout, which commenced on 2 November 2026 and covers postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. For Lurnea this is the current arrangement, not a future one. Prestons, Casula and Moorebank share the postcode and the date.

A flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions require it. The opt-out is Endeavour's Fixed Exports plan with a maximum export of 1.5kW, carrying the same connection requirements. Given the flexible option is already available here, choosing the fixed one deliberately would be an unusual decision on any sizeable array.

Liverpool council is split across dates, since the staging is by postcode rather than by council: 2170 and 2173 moved on 2 November, while 2171 did not move until 30 November.

What your system has to meet

Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.

The emergency backstop mechanism allows the network to curtail exports when the grid cannot absorb what is being sent into it. Endeavour describes it as a last resort, expected to be used rarely and for short periods.

What Lurnea properties mean for system design

Mostly single storey, which keeps costs down. A single-storey roof is safer and quicker to work on and usually gives better access to the full roof plane. Access and scaffolding are a larger share of a small job, so this matters more at the modest end of the range.

Rooftop solar panels on a home in New South Wales
Illustrative. The usable north and west area is normally smaller than the roof looks from the street.

Switchboard age is the recurring cost. Established housing here frequently needs switchboard replacement or upgrade before a battery, in capacity, protective devices and physical space. It should be assessed and priced before you sign rather than raised on installation day. On a modest system this one line can be a large fraction of the quote, so it matters that it is real and itemised.

Asbestos in a pre-1990 house is a constraint to plan for, not a scare. Bonded asbestos cement sheeting was used in Australian housing until the late 1980s, including eaves linings, meter box backing boards and some wall sheeting. Where it is present it changes how cable is run, where penetrations can be made and who may do that work. It does not prevent a solar installation; it means the eaves and meter box are inspected during the site assessment rather than discovered with a drill.

Roof condition decides the sequence. Where a roof is close to needing replacement or significant repair, doing that first and the solar second is cheaper than paying to remove and refit an array later. The roof is assessed at quote stage.

Decades of garden growth. A tree that casts nothing on the roof in January can cover a significant part of an array at nine in the morning in June, because the sun is roughly thirty degrees lower. Shading is assessed for the winter sun path rather than from how the roof looks on the day of the visit.

For lots toward the Georges River side, the flood position is worth checking from council mapping, because it bears on where the inverter, battery and switchboard can safely be sited.

Batteries in Lurnea

A battery is sized against evening and overnight consumption, not against the size of the array. The figure to work from is what the household actually uses after dark, which your bills and meter data answer better than any estimate.

A wall-mounted residential home battery beside a switchboard
Illustrative. Capacity is sized against evening and overnight use, not against the size of the array.

A smaller battery that is actually cycled every day beats a large one that is rarely emptied. Oversized storage on a modest array is an expensive way to feel prepared.

Where the roof cannot carry a larger array, storage is often the better of the two purchases, because energy you store and use yourself is worth the retail rate you avoid paying rather than the feed-in rate you do not control.

Where a battery is being retrofitted, the inverter decides most of the cost. Adding storage is treated as an upgrade, which brings the connection under current requirements, so an inverter that is not CSIP-AUS approved turns an addition into a replacement plus an addition. On housing of this age the switchboard often sits on the same critical path.

The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.

Approvals: Liverpool City Council and the NSW planning rules

Lurnea falls within Liverpool City Council. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.

The exemption is conditional, with a capacity limit and a restriction on panels facing the street among the conditions, and a proposal that does not meet every one of them requires development consent instead. For lots nearer the river corridor the flood position is worth establishing from council mapping as well. Crown Solar checks the lot before the quote is finalised.

What the installation actually involves

  1. Ownership and authority. Confirmed first, because without the owner's authority there is no job.

  2. Twelve months of consumption. Bills and, where available, interval data split between daytime and after dark, because that split sizes the array and the battery separately.

  3. Supply arrangement. Single or three phase, which sets the practical ceiling.

  4. Site assessment. Every usable roof face with its orientation and pitch, winter shading, roof condition, and the inverter position with its internet coverage.

  5. Switchboard, meter box and eaves. Condition, capacity, and whether pre-1990 sheeting is present.

  6. Design and quote. Sizing against your own consumption with the reasoning stated, and the export arrangement, which here is the flexible one already in force.

  7. Connection application to Endeavour Energy. Nothing is installed before approval.

  8. Commissioning, metering and handover paperwork.

Find out what your roof can carry

Postcode 2170 is in Endeavour's first stage. A connection applied for now gets the flexible export limit, not the fixed one.

Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.

Common questions about solar in Lurnea

Is there any reason to wait?

Not on the export question, because 2170 is already in the first stage. The arrangement available to you now is the flexible one, which is the more generous of the two.

Is a small system a waste of money?

No, if it is sized to the roof and the household and installed on compliant equipment. What makes a small system a bad buy is an inverter with no headroom to expand, poor roof faces used to reach a number, or a switchboard cost assumed rather than inspected. The kilowatt figure is not the thing to judge it by.

What should I ask every installer who quotes me?

Which roof faces carry the panels and at what orientation, what daytime consumption the size was derived from, whether the switchboard and eaves have been inspected and priced or merely assumed, and whether the inverter leaves headroom if you expand later.

What Crown Solar installs here

The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range. On the local record LONGi and Canadian Solar panels appear on the Lurnea roofs on file, from the earlier years of this work. That distinction is worth having if you are comparing a quote today against what a neighbour had fitted: the panel on your quote is the current one, not the one on their roof. Crown Solar also installs JA Solar, Jinko Solar, AE Solar and LONGi panels.

Inverters and storage

GoodWe accounts for most of the recorded inverters on the Lurnea jobs.

Crown Solar also installs FoxESS, Sungrow, Fronius and SAJ inverters, and Tesla Powerwall, Sigenergy and AlphaESS batteries. Which one suits depends on whether you want whole-home backup, whether you expect to expand later, and whether you intend to join a virtual power plant. If expansion is likely, the inverter choice is the decision that keeps that door open. Those are the current range, available on any job, not a list of what has been fitted locally.

Talk to Crown Solar about your Lurnea home

Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.

For a quote on a Lurnea address you own, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form.

Get it in writing for your Lurnea address

Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.

Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?

Want this checked against your own roof and bill?

Get a free, no-obligation quote