Solar and battery installation in Revesby

Revesby is on Ausgrid, which does not publish its export figures. You cannot size a system sensibly without that number, so getting it in writing is the first job, not the last.

Solar in Revesby: the number Ausgrid does not publish

Revesby accounts for three completed Crown Solar installations. Where a system size is recorded, the two figures on file are 6.6kW and 13.2kW. Almost exactly double. Two records are not a local figure and this page does not present them as one, but that pair is a fair picture of what changed in the market between an older 5kW-class system and a current one.

What this page can be most useful about, though, is a gap in the public information. Revesby is on Ausgrid, and Ausgrid does not publish its export figures. The Revesby jobs on Crown Solar's record that carry a meter identifier show an Ausgrid network prefix, and the flexible export dates being discussed across south-western Sydney, 2 November and 30 November 2026, are Endeavour dates, not Revesby's.

That matters more than it sounds, because on Ausgrid you cannot size a system sensibly without a number that is not on any website. It has to be asked for.

3completed Crown Solar installations in Revesby
Ausgridnot an Endeavour postcode, so the November export dates do not apply

Why the export limit sets the ceiling on your array

Here is the arithmetic, in plain terms.

Every kilowatt-hour your system makes goes to one of three places. You use it as it is generated, you store it, or you export it. Generation that goes to none of those is generation you paid for once and will never see again.

So the useful size of an array is set by how much you can consume during daylight, plus how much you can store, plus how much you are permitted to export. The first two you can work out from your own bills and meter data. The third, on Ausgrid, is not published.

Ausgrid offers a choice between a flexible export connection, which permits the maximum export, and a fixed export connection, which is constantly lower. It does not state the kilowatt figures on its connection page, and this site will not guess at them.

Which means the honest sequence is: get the limit in writing, then size the array. Not the other way around. An installer who quotes you a system size for a Revesby address without having established the export arrangement has sized it against an assumption, and on the larger of the two local figures that assumption is worth real money. Ask for the limits that will apply at your address, in writing, as part of the quote.

And where the limit turns out to be low, storage is the answer rather than more panels, because energy you store and use yourself is worth the retail rate you avoid paying rather than a feed-in rate you do not control.

What is actually happening on Ausgrid

From 23 November 2026 Ausgrid launches the first release of Ausgrid Connect for embedded generation applications, a new system with a new sign-in. Other application types continue through the existing process for the time being.

Ausgrid approves your connection and sets your export arrangement. Your electricity retailer does neither.

The NSW-wide requirements, which do apply here

From November 2026, new requirements are being phased in for all new and upgrading solar systems in NSW. A smart solar inverter capable of responding to an emergency backstop, registration in the NSW Government's CER Installer Portal, and an internet connection communicating securely with network systems.

Ausgrid also says plainly to always use a Solar Accreditation Australia (SAA) accredited installer, and that you should receive a Certificate of Compliance for Electrical Work after installation confirming the system was installed and tested safely. Keep it. You will want it when you sell the house.

The emergency backstop mechanism is a last-resort measure for rare conditions when more rooftop solar is flowing into the grid than can be used, in which the network signals eligible systems to reduce exports briefly. It is a different thing from your ordinary export limit: the limit applies all the time, the backstop is occasional.

What Revesby properties mean for system design

Established housing, so switchboard age is the recurring cost. A board of this era frequently needs replacement or upgrade before a battery, in capacity, protective devices and physical space. It should be assessed and priced before you sign rather than raised on installation day. Two quotes that look far apart frequently differ on exactly this line.

Rooftop solar panels on a home in New South Wales
Illustrative. The usable north and west area is normally smaller than the roof looks from the street.

Asbestos in a pre-1990 house is a constraint to plan for. Bonded asbestos cement sheeting was used in Australian housing until the late 1980s, including eaves linings, meter box backing boards and some wall sheeting. Where it is present it changes how cable is run, where penetrations can be made and who may do that work. It does not prevent a solar installation; it means the eaves and meter box are inspected during the site assessment rather than discovered with a drill.

Mixed roof ages and materials. Terracotta tile, concrete tile and sheet metal all appear, sometimes on one house where an addition has been built. Older tiles are brittle, so the mounting method and the number of tiles lifted matter, and a competent installer expects to replace a few.

Roof condition decides the sequence. Where a roof is close to needing replacement or significant repair, doing that first and the solar second is cheaper than paying to remove and refit an array later. The roof is assessed at quote stage.

Winter shading from mature planting. A tree that casts nothing on the roof in January can cover a significant part of an array at nine in the morning in June, because the sun is roughly thirty degrees lower. Shading is assessed for the winter sun path rather than from how the roof looks on the day of the visit.

Usable faces, not total roof area. The north and west area that can actually carry panels is normally smaller than the roof appears, and on the larger of the two local figures the roof has to be able to take it.

For lots toward the Georges River side of the suburb, the flood position is worth checking from council mapping, because it bears on where the inverter, battery and switchboard can safely be sited.

Batteries in Revesby

A battery is sized against evening and overnight consumption, not against the size of the array. The useful figure is what the household actually uses after dark, which your bills and meter data answer better than any estimate.

A wall-mounted residential home battery beside a switchboard
Illustrative. Capacity is sized against evening and overnight use, not against the size of the array.

A smaller battery that is actually cycled every day beats a large one that is rarely emptied. Oversized storage is an expensive way to feel prepared.

On an Ausgrid connection storage is often the better purchase than extra panels, for the reason set out above: with the export limit unpublished until you ask, and potentially low, stored energy has a more certain value than exported energy.

Where a battery is being retrofitted, the inverter decides most of the cost. Adding storage is treated as an upgrade, which brings the connection under current requirements, so an inverter that cannot respond to the emergency backstop turns an addition into a replacement plus an addition. On housing of this age the switchboard often sits on the same critical path.

The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.

Approvals: City of Canterbury-Bankstown and the NSW planning rules

Revesby falls within the City of Canterbury-Bankstown. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.

The exemption is conditional, with a capacity limit and a restriction on panels facing the street among the conditions, and a proposal that does not meet every one of them requires development consent instead. It also carries limits on land with heritage significance, and the council maintains a heritage schedule. Crown Solar checks the lot before the quote is finalised.

What the installation actually involves

  1. Export arrangement established in writing. On Ausgrid this comes before sizing, not after.

  2. Twelve months of consumption. Bills and, where available, interval data split between daytime and after dark.

  3. Site assessment. Roof material, pitch, age and condition, usable faces, winter shading, and the inverter position with its internet coverage.

  4. Switchboard, meter box and eaves. Condition, capacity, and whether pre-1990 sheeting is present.

  5. The existing system, if there is one. Make, model and age of the inverter, and whether it is battery-capable.

  6. Design and quote. Layout by roof face, array sized against the export position and your daytime use, and battery sized against overnight use.

  7. Connection application to Ausgrid, submitted by your installer.

  8. Commissioning, metering and handover paperwork, including the Certificate of Compliance for Electrical Work.

Find out what your roof can carry

The design starts with your roof and your own bill, not with a number over the phone.

Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.

Common questions about solar in Revesby

Should I wait for the November network changes?

No, and the question partly rests on a mix-up: the staged November dates belong to Endeavour Energy, which is not your network. What applies from November is the NSW-wide equipment and registration requirement, satisfied by using compliant equipment now rather than by waiting.

My installer says they will "sort out the export limit later". Is that normal?

It happens, and it puts the risk on you. The limit decides whether the top end of your array earns anything, so a quote that leaves it open has left the most consequential number blank. Ask for it before you sign.

What should I ask every installer who quotes me?

Which network they have quoted against, and whether they say Ausgrid. What export limit will apply at your address, in writing. What consumption figure the array size was derived from. And whether the switchboard has been inspected and priced or merely assumed.

What Crown Solar installs here

The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range. On the local record Jinko Solar and AE Solar panels appear on the Revesby roofs on file, from the earlier years of this work. That distinction is worth having if you are comparing a quote today against what a neighbour had fitted: the panel on your quote is the current one, not the one on their roof. Crown Solar also installs JA Solar, AE Solar and LONGi panels.

Inverters and storage

GoodWe and FoxESS both appear on the recorded Revesby inverters, with FoxESS on the storage side of the record.

Crown Solar also installs Sungrow, Fronius and SAJ inverters, and Tesla Powerwall, Sigenergy and AlphaESS batteries. Which one suits depends on whether you want whole-home backup, whether you expect to expand later, and whether you intend to join a virtual power plant, and those are three genuinely different conversations rather than three names for the same product. Those are the current range, available on any job, not a list of what has been fitted locally.

Talk to Crown Solar about your Revesby home

Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.

For a quote on a Revesby address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form.

Get it in writing for your Revesby address

Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.

Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?

Want this checked against your own roof and bill?

Get a free, no-obligation quote