Solar and battery installation in St Andrews

Flexible exports already apply in St Andrews, so a new connection can export far more than the 6.6kW systems of a decade ago were built around. That changes the sizing conversation.

Solar in St Andrews: the export ceiling that shaped 6.6kW has moved

St Andrews accounts for four completed Crown Solar installations. Where a system size is recorded, there is one figure on file, at 6.6kW. One record is not a local figure and this page will not present it as one.

But that number is a useful way into the most relevant change for a St Andrews household, because 6.6kW was never an accident. For years it was the standard residential size across this part of Sydney, built around a 5kW-class inverter and the export arrangement that went with it, with the panels oversized against the inverter by the allowed ratio. Tens of thousands of Sydney roofs carry exactly that system.

That ceiling has moved, and in St Andrews it has already moved. Postcode 2566 is in the first stage of Endeavour's flexible export rollout, which commenced on 2 November 2026, and a flexible export connection allows up to 10kW per phase to be exported most of the time. So the constraint that shaped a decade of 6.6kW installations is not the constraint you are working within now. That is the honest reason a sizing conversation here looks different from the one your neighbour had in 2018.

4completed Crown Solar installations in St Andrews
Live nowflexible exports have applied to postcode 2566 since 2 November 2026

Your grid connection: Endeavour Energy, postcode 2566

St Andrews is in the Endeavour Energy distribution area. Endeavour approves the connection and sets the export limit. Your electricity retailer does neither.

Where 2566 sits in Endeavour's rollout

Endeavour stages flexible exports by postcode, not by council.

  1. Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. Postcode 2566 is in this stage
  2. Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
  3. Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address.

What you may export, by connection type

Endeavour Energy, kilowatts per phase.

Export allowance by connection type A flexible export connection allows up to 10kW per phase most of the time. The Fixed Exports opt-out allows a maximum of 1.5kW. Flexible export 10kW Fixed export 1.5kW
A flexible export connection allows up to 10kW per phase, most of the time. The network reduces that only when local grid conditions require it. The Fixed Exports opt-out allows a maximum of 1.5kW. Both carry the same connection requirements.

Flexible exports already apply in 2566

Postcode 2566 is named in the first stage of Endeavour's rollout, which commenced on 2 November 2026 and covers postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. For St Andrews this is the current arrangement, not a future one. Minto shares the postcode and sits on the same date.

A flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions require it. The opt-out is Endeavour's Fixed Exports plan with a maximum export of 1.5kW, carrying the same connection requirements. Given that the flexible option is already available here, choosing the fixed one deliberately would be an unusual decision on any sizeable array.

The per-phase basis is worth establishing for your own property. On three phases the arithmetic changes substantially, so confirm your supply type before comparing quotes.

What your system has to meet

Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.

On an expansion or a battery retrofit, that last requirement is the whole question. If the inverter already on your wall is CSIP-AUS approved, adding to the system is an addition. If it is not, the upgrade brings the connection under current requirements and the inverter has to be replaced as part of the job. That single fact accounts for most of the difference between two quotes on a house that already has panels.

The emergency backstop mechanism allows the network to curtail exports when the grid cannot absorb what is being sent into it. Endeavour describes it as a last resort, expected to be used rarely and for short periods.

Expanding an existing system: what is actually possible

If you have a 6.6kW system on a St Andrews roof, there are three realistic paths and they cost very different amounts.

Add panels within the existing inverter's capacity. The cheapest option where it is available. Every inverter has a rated capacity and an allowed ratio by which the panel array may exceed it, and once you are at that ratio more panels do nothing at all. On a system that was already oversized to reach 6.6kW from a 5kW-class inverter, there is often very little headroom left. The ceiling is specific to the unit on your wall, which is why the model is the first thing checked rather than a detail.

Replace the inverter and expand the array. More expensive, and it opens the 10kW-per-phase allowance properly. It also brings the installation under current requirements, which is unavoidable on an upgrade and is the right moment to deal with it once rather than twice.

Leave the array and add storage. Often the better value where the roof is full or the faces are poor, because stored energy avoids the retail rate you would otherwise pay, which is worth more than the feed-in rate you do not control. The inverter question applies here too.

What makes the difference is your own data. With panels already on the roof you know what the system produced, what you used and what you exported. If you are exporting a large share, storage is the obvious candidate. If you are importing heavily during the day, more generation is. That is a question your bills answer, not a question of preference.

What St Andrews properties mean for system design

Estate housing of a consistent era. The housing here is largely detached brick-and-tile from the estate development of the 1980s, which makes the design questions unusually predictable for a Sydney suburb. Tile roofs of that age are the norm, and the local record reflects it.

Rooftop solar panels on a home in New South Wales
Illustrative. The usable north and west area is normally smaller than the roof looks from the street.

Roof age now decides the sequence. At forty years, ridge pointing, valley irons and sarking are commonly due for attention. If that work is needed, doing it after an array goes on means paying to remove and refit the array. The roof is assessed at quote stage so the order of work is a decision rather than a surprise, and an installer who does not raise it on a roof of this age has not looked at it.

Brittle tiles mean expected breakage. Concrete tiles of this era break when walked on and when lifted, and a competent installer expects to replace a few. Ask who carries that cost and whether matching tiles are available.

Switchboard age. A board from the 1980s frequently needs replacement or upgrade before a battery, in terms of capacity, protective devices and physical space. It should be assessed and priced before you sign rather than raised on installation day.

Winter shading from forty years of garden growth. A tree that casts nothing on the roof in January can cover a significant part of an array at nine in the morning in June, because the sun is roughly thirty degrees lower. Shading is assessed for the winter sun path rather than from how the roof looks on the day of the visit. On an expansion this matters particularly, because the faces still free are often the ones the original installer avoided for a reason.

Usable faces, not total roof area. A hip roof of this era divides into four modest faces, and the north and west area that can carry panels is normally smaller than the roof appears.

Batteries in St Andrews

A battery is sized against evening and overnight consumption, not against the size of the array. On a house that already has panels, your own export figures are the best available evidence of how much generation is currently going to waste.

A wall-mounted residential home battery beside a switchboard
Illustrative. Capacity is sized against evening and overnight use, not against the size of the array.

A smaller battery that is actually cycled every day beats a large one that is rarely emptied. Oversized storage is an expensive way to feel prepared.

Where a battery is being retrofitted, the inverter decides most of the cost, for the reasons set out above. On housing of this age the switchboard often sits on the same critical path, which is why both are checked before a figure is quoted.

The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.

Approvals: Campbelltown City Council and the NSW planning rules

St Andrews falls within Campbelltown City Council. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.

The exemption is conditional, with a capacity limit and a restriction on panels facing the street among the conditions, and a proposal that does not meet every one of them requires development consent instead. On an expansion the capacity limit is worth checking rather than assuming, because a system that was comfortably inside the exemption at 6.6kW may be a different proposition at twice the size. Crown Solar checks the lot and the proposal before the quote is finalised.

What the installation actually involves

  1. The existing system first. Make, model, age and capacity of the inverter, whether it is CSIP-AUS approved, how much panel headroom remains within its allowed ratio, and whether it is battery-capable.

  2. Your own production and export data. Which decides whether more generation or storage is the better purchase.

  3. Site assessment. Remaining usable faces, their orientation and winter shading, roof condition, and the inverter position with its internet coverage.

  4. Switchboard and meter box. Capacity, protective devices and physical space for what is being added.

  5. Design and quote. Array and battery sized separately, any inverter, roof or switchboard work itemised, and the export arrangement, which here is the flexible one already in force.

  6. Connection application to Endeavour Energy. Nothing is installed before approval.

  7. Commissioning, metering and handover paperwork.

Find out what your roof can carry

Postcode 2566 is in Endeavour's first stage. A connection applied for now gets the flexible export limit, not the fixed one.

Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.

Common questions about solar in St Andrews

Is there any reason to wait?

Not on the export question, because 2566 is already in the first stage. The arrangement available to you now is the flexible one, which is the more generous of the two.

My inverter is ten years old. Is it worth keeping?

Often not. Beyond whether it is CSIP-AUS approved and battery-capable, an inverter of that age has limited service life left, and keeping it to save money on an upgrade can cost more over the following five years than replacing it during the same visit.

What should I ask every installer who quotes me?

How much panel headroom the existing inverter actually has, whether it is being kept or replaced and why, whether the roof's remaining life has been assessed, and whether the switchboard has been inspected and priced or merely assumed.

What Crown Solar installs here

The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range. On the local record Jinko Solar is the panel on the St Andrews roof on file, from the earlier years of this work. That distinction is worth having if you are comparing a quote today against what a neighbour had fitted: the panel on your quote is the current one, not the one on their roof. Crown Solar also installs JA Solar, AE Solar and LONGi panels.

Inverters and storage

Sungrow appears on the recorded St Andrews inverters. No battery is recorded on the local jobs, which is itself worth knowing: the St Andrews record is solar rather than storage, and that is the position most households here are expanding from.

Crown Solar also installs FoxESS, Fronius, GoodWe and SAJ inverters, and Tesla Powerwall, Sigenergy and AlphaESS batteries. Which one suits depends on whether you want whole-home backup, whether you expect to expand later, and whether you intend to join a virtual power plant. On an expansion or retrofit the existing inverter narrows that field before any of them are discussed. Those are the current range, available on any job, not a list of what has been fitted locally.

Talk to Crown Solar about your St Andrews home

Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.

For a quote on a St Andrews address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form.

Get it in writing for your St Andrews address

Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.

Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?

Want this checked against your own roof and bill?

Get a free, no-obligation quote