Solar and battery installation in Cobbitty
Cobbitty is two solar problems on one postcode: acreage with sheds and long cable runs, and brand-new estate lots. Flexible exports already apply here, and the local systems are the largest on record.
Solar in Cobbitty: acreage and new estate on one postcode
Cobbitty accounts for five completed Crown Solar installations, and the local record carries the largest systems Crown Solar has on file anywhere. The two recorded array sizes are 9.7kW and 22.0kW, and the two recorded batteries are 40.0kWh and 47.9kWh. Those are not suburban numbers, and the reason is the land.
Cobbitty covers roughly 5,216 hectares in the northern ward of Camden Council, about 60 kilometres south-west of the Sydney CBD, and its character is agricultural. Large holdings, sheds, outbuildings, pumps and long driveways are normal here. At the same time the locality is being developed: a substantial residential release is settling through the second half of this decade, and planning controls for land on the Cobbitty Road frontage keep an interface area of larger lots with a minimum 1,000 square metres.
So a Cobbitty address can mean a working rural property with three-phase supply and a machinery shed, or a new house on a compact estate lot a few hundred metres away. Those are genuinely different jobs. This page covers both, because a page that assumed either one would be wrong half the time.
Your grid connection: Endeavour Energy, postcode 2570
Cobbitty is in the Endeavour Energy distribution area. Endeavour approves the connection and sets the export limit. Your electricity retailer does neither.
Where 2570 sits in Endeavour's rollout
Endeavour stages flexible exports by postcode, not by council.
-
Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. Postcode 2570 is in this stage
-
Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
-
Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address.
What you may export, by connection type
Endeavour Energy, kilowatts per phase.
Flexible exports already apply in 2570
Postcode 2570 is named in the first stage of Endeavour's rollout, which commenced on 2 November 2026 and covers postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. For Cobbitty this is the current arrangement, not a future one. The same postcode covers Spring Farm and Camden itself, so those addresses sit on the same date.
A flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions require it. The per-phase basis is the single most important sentence on this page for an acreage property, because a three-phase rural connection and a single-phase estate house on the same postcode are working with very different allowances. On three phases the arithmetic changes substantially, and it is worth establishing your supply type before you compare any two quotes.
The opt-out is Endeavour's Fixed Exports plan with a maximum export of 1.5kW, carrying the same connection requirements. On a 22kW array that is not a simplification, it is a severe restriction.
What your system has to meet
Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.
The internet requirement is a genuine issue on rural land, not a formality. Where the switchboard is on a pole or in a shed a long way from the house, the inverter position may have no usable Wi-Fi at all, and a cable run or a dedicated link becomes part of the job rather than an afterthought. Signal at the inverter position is checked during the assessment.
Larger systems carry a further consideration. Streamlined approval pathways apply up to certain inverter capacity thresholds, and above those a proposal can require a more detailed network assessment, which takes longer and may carry a cost. For a 20kW-plus Cobbitty system that timeline belongs in the plan from the beginning, because discovering it after equipment has been ordered is an expensive way to learn it.
The emergency backstop mechanism allows the network to curtail exports when the grid cannot absorb what is being sent into it. Endeavour describes it as a last resort, expected to be used rarely and for short periods.
Designing for acreage: what actually changes
The best roof is often not the house. A machinery shed, barn or garage frequently offers a larger, simpler, better-oriented and completely unshaded plane. The trade-off is distance.
Voltage drop over distance is the rural cost nobody quotes for. Running DC or AC a long way from an outbuilding back to the main switchboard means heavier cable, and heavier cable costs money. Undersize it and you lose output permanently and quietly. The cable run is calculated, not estimated, and on a large block it can change which roof is the right one even when the shed has the better aspect.
Pumps change the load profile completely. A bore, irrigation or pressure pump is a large intermittent load with a high starting current. Whether it runs at midday or at four in the morning decides whether that energy comes from the array, from the battery or from the grid, and it affects both battery sizing and inverter selection. Pumps are designed into the system rather than treated as background consumption.
Three-phase supply is common and useful. Beyond the per-phase export allowance, three-phase changes which inverters are suitable and how a battery is configured for backup. Whether backup covers the whole property or a selected circuit is a decision worth making deliberately on a rural block, where a pump or a cold room may matter more during an outage than the lighting.
Dust, stock and distance from the ground. Panels on a shed near unsealed driveways or stockyards soil faster than panels on a suburban roof, which is a maintenance reality rather than a fault. Access for cleaning and inspection is worth considering at design stage.
Designing for a new Cobbitty estate lot
On the newer residential land the questions are the growth-area ones instead.
Lots are compact, houses are frequently double-storey and close together, and a contemporary roof is often a set of hips and valleys rather than two large planes, so the usable area is smaller than the roof looks. Switchboards are modern, which removes a cost that appears on most quotes in established suburbs. Where a house was built with a system already fitted, the first question is the make, model and capacity of the inverter on the wall, because that decides whether a battery or more panels can be added without replacing it.
Many estate lots also carry developer design guidelines registered on the title or imposed through the land contract, which can restrict street-facing equipment independently of the planning rules. Those are a private arrangement rather than a council matter, and they are checked against the lot before the layout is fixed.
Storage at Cobbitty scale
With two recorded batteries at 40.0kWh and 47.9kWh, the sizing logic here deserves to be stated properly rather than scaled up from a suburban rule of thumb.
A battery is sized against evening and overnight consumption, not against the size of the array. On a rural property that figure is higher and lumpier than in a suburb, because pumps, sheds, workshops and sometimes a second dwelling sit on the same meter. The useful exercise is to work out what actually runs after dark and what you want to keep running if the supply drops, which on acreage is frequently water before anything else.
A smaller battery that is cycled every day beats a large one that is rarely emptied. Storage at this scale is a considered purchase, and oversizing it is an expensive way to feel prepared. Where a battery is being retrofitted, the inverter decides most of the cost: adding storage is treated as an upgrade, which brings the connection under current requirements, so an inverter that is not CSIP-AUS approved turns an addition into a replacement plus an addition.
The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.
Approvals: Camden Council and the NSW planning rules
Cobbitty falls within Camden Council. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.
On rural-zoned land there are two further checks worth making rather than assuming. The exemption is conditional, with a capacity limit among the conditions, so a large shed-mounted or ground-mounted array can fall outside it and need development consent. And much of the Camden rural area is subject to bushfire-prone land mapping and, closer to the Nepean and its tributaries, flood mapping, both of which bear on where ground-level equipment can be sited. On a flood-affected or bushfire-mapped lot the position of the inverter, battery and switchboard becomes a deliberate decision rather than a default. Crown Solar checks the lot before the quote is finalised.
What the installation actually involves
Site assessment across the whole property. Every candidate roof, not only the house: orientation, pitch, structure and shading on each.
Supply and switchboard. Single or three phase, switchboard location and condition, and the distance from each candidate roof to it.
Load profile including pumps. What runs, when, and what must keep running in an outage.
Cable run calculation. Voltage drop for each option, which can decide which roof is used.
Design and quote. Layout by roof face, battery sizing against overnight and pump load, and the per-phase export position.
Connection application to Endeavour Energy. Nothing is installed before approval, and larger systems may need a fuller network assessment.
Commissioning, metering and handover paperwork.
Find out what your roof can carry
Postcode 2570 is in Endeavour's first stage. A connection applied for now gets the flexible export limit, not the fixed one.
Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.
Common questions about solar in Cobbitty
Is a 20kW-plus system reasonable for a house?
For a house alone, usually not. For a property with sheds, pumps, a workshop and sometimes a second dwelling on the same supply, it can be exactly right. The size follows the load and the supply arrangement, which is why two Cobbitty quotes can legitimately differ by a factor of two.
Should the array go on the ground?
It is possible on acreage and occasionally the best answer, but it is a different approval pathway and a different cost structure: footings, framing, cable and fencing or stock protection. On rural-zoned land it can require development consent. It is worth pricing against a shed-mounted option rather than assumed either way.
Will a battery keep my water running in an outage?
It can, if that is designed in. A pump is a high-starting-current load and whether the battery and inverter combination can start it on backup is a specification question, not a hope. Say at the quote stage what you need to keep running.
What Crown Solar installs here
The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range, and Trina appears on the Cobbitty record as well. JA Solar is also on file locally. Crown Solar additionally installs Jinko Solar, AE Solar and LONGi panels.
Inverters and storage
FoxESS, Sungrow and GoodWe all appear on the recorded Cobbitty inverters, which is what a mixed rural and residential record looks like rather than a local preference. FoxESS appears on the storage side as well.
Crown Solar also installs Fronius and SAJ inverters, and Tesla Powerwall, Sigenergy and AlphaESS batteries. Which one suits depends on whether you want whole-home backup, whether you expect to expand later, and whether you intend to join a virtual power plant. On a three-phase rural property those are three genuinely different conversations, and the backup question usually leads. Those are the current range, available on any job, not a list of what has been fitted locally.
Talk to Crown Solar about your Cobbitty property
Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.
For a quote on a Cobbitty address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form. For a larger property or a commercial shed roof, commercial@crownsolar.com.au reaches the commercial team.
Get it in writing for your Cobbitty address
Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.
Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?