Solar and battery installation in Mount Annan
Flexible exports already apply in Mount Annan, so the export rules here are current rather than pending. The local work is battery retrofits, and the suburb's ridges and slopes do real work in a design.
Solar in Mount Annan: a retrofit suburb on a current timetable
Mount Annan accounts for five completed Crown Solar installations, and the recorded work here is storage: batteries added to homes that already had panels. That pattern tells you something real about the suburb. These are established estate homes, most of them built from the 1990s onward, where solar went on years ago and the household is now completing the system rather than starting it.
Where a system size is recorded on the Mount Annan jobs, the two figures on file are 13.2kW and 13.3kW. They sit at the upper end of residential sizing and they are almost identical, which looks like a local pattern and is not one. Two records that happen to land close together are a coincidence of a small sample. This page will not turn them into a Mount Annan norm, because that would be inventing a figure rather than reporting one.
Your grid connection: Endeavour Energy, postcode 2567
Mount Annan is in the Endeavour Energy distribution area. Endeavour approves the connection and sets the export limit. Your electricity retailer does neither.
Where 2567 sits in Endeavour's rollout
Endeavour stages flexible exports by postcode, not by council.
-
Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. Postcode 2567 is in this stage
-
Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
-
Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address.
What you may export, by connection type
Endeavour Energy, kilowatts per phase.
Flexible exports already apply in 2567
Postcode 2567 is named in the first stage of Endeavour's rollout, which commenced on 2 November 2026 and covers postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. For Mount Annan this is the current arrangement, not a future one, and it is the opposite of the position in much of north-western Sydney where the change is still months away.
A flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions require it. The opt-out is Endeavour's Fixed Exports plan with a maximum export of 1.5kW, carrying the same connection requirements. On an array already sized above 10kW, 1.5kW is a severe restriction rather than a simplification.
Neighbouring Camden postcodes moved on the same date, so Cobbitty, Spring Farm and Oran Park are in the same position. Endeavour stages by postcode rather than by council, so that alignment holds here and does not hold everywhere.
What your system has to meet
Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.
For a retrofit that last requirement is the whole question. If the inverter already on your wall is CSIP-AUS approved, adding storage is an addition. If it is not, the upgrade brings the connection under the current requirements and the inverter has to be replaced as part of the job. That single fact accounts for most of the difference between two Mount Annan retrofit quotes, and it is why the make and model of the existing unit is the first thing checked.
The emergency backstop mechanism allows the network to curtail exports when the grid cannot absorb what is being sent into it. Endeavour describes it as a last resort, expected to be used rarely and for short periods.
What Mount Annan properties mean for system design
Mount Annan is named for the hill it sits on, and the ground here is genuinely undulating rather than nominally so. Two design consequences follow.
Slope and aspect matter more here than on flat ground. On a sloping suburb the orientation of the house and what sits uphill of it change the picture considerably. A property below a ridge to its north behaves quite differently from one above it, and a neighbour's two-storey house uphill to the north-west is a different problem from the same house on level ground. This is a site question that a desktop design and an aerial image cannot answer.
Tree cover is substantial on the garden side. The suburb adjoins the Australian Botanic Garden, and thirty years of established planting on the residential streets is enough to put mature canopy over a roof face. A tree that casts nothing on the roof in January can cover a significant part of an array at nine in the morning in June, because the sun is roughly thirty degrees lower. Shading is assessed for the winter sun path rather than from how the roof looks on the day of the visit.
Estate roofs of this era split into many faces. Detached brick-and-tile with hips, valleys and sometimes a separate garage plane means the usable area is smaller than the roof looks, and the array ends up spread across more faces than a simple two-plane roof needs. That changes inverter and string selection, which is a design decision rather than an arithmetic one.
Roof age is now a real question. On housing built in the 1990s, ridge pointing and valley irons commonly need attention at around the thirty-year mark. If that work is due, doing it after an array is installed means paying to remove and refit the array. The roof is assessed at quote stage so the sequence is a decision rather than a surprise.
Switchboard age. A 1990s switchboard is usually in better shape than a 1960s one and is still often short of what a battery needs in capacity, protective devices and physical space. It is assessed and priced before you sign rather than raised on installation day.
Adding a battery to an existing system
Since this is what the Mount Annan record is mostly made of, it deserves the detail.
You have better data than a new buyer. With panels already on the roof you know what the system produced, what you consumed and what you exported. A battery is sized against evening and overnight consumption, not against the size of the array, and your own export figures are the best available evidence of how much generation is currently going to waste.
A smaller battery that is cycled daily beats a large one that is rarely emptied. Oversized storage is an expensive way to feel prepared. On a house with ducted air conditioning and electric hot water the overnight figure can be high enough to justify real capacity, which is a reason to look at the data rather than a reason to assume.
Decide what backup means to you before you choose equipment. Whole-home backup, a selected essential circuit, or no backup at all are three different specifications at three different prices. The same is true of whether you intend to join a virtual power plant later. Those decisions narrow the equipment list, rather than the equipment list deciding them.
The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.
Approvals: Camden Council and the NSW planning rules
Mount Annan falls within Camden Council. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.
The exemption is conditional, with a capacity limit and a restriction on panels facing the street among the conditions, and a proposal that does not meet every one of them requires development consent instead. Two further checks are worth making rather than assuming in this part of the Camden area: bushfire-prone land mapping, which applies to lots adjoining the reserve and bushland edges here, and any restrictions registered on the title, since estates of this era commonly carry covenants on external appearance. On a bushfire-mapped lot the siting of ground-level equipment and the cable routing become deliberate decisions rather than defaults. Crown Solar checks the lot before the quote is finalised.
What the installation actually involves
The existing system first. Make, model, age and capacity of the inverter, whether it is CSIP-AUS approved, and whether it is battery-capable.
Site assessment. Roof type, pitch and condition, usable faces, the slope and what sits uphill, winter shading, and the inverter position with its internet coverage.
Switchboard and meter box. Capacity, protective devices and physical space for what is being added.
Design and quote. Battery sizing against your actual overnight consumption and your own export data, any roof or switchboard work, and the export arrangement, which here is the flexible one already in force.
Connection application to Endeavour Energy. Nothing is installed before approval.
Commissioning, metering and handover paperwork.
Find out what your roof can carry
Postcode 2567 is in Endeavour's first stage. A connection applied for now gets the flexible export limit, not the fixed one.
Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.
Common questions about solar in Mount Annan
Is there any reason to wait?
Not on the export question, because 2567 is already in the first stage. The arrangement available to you now is the flexible one, which is the more generous of the two.
My inverter is ten years old. Is it worth keeping?
Possibly not, and age is only part of it. The questions are whether it is CSIP-AUS approved, whether it is battery-capable, and how much service life is left. A ten-year-old inverter kept to save money can cost more over the following five years than replacing it during the same visit.
Why do two retrofit quotes differ so much?
Usually because one has priced replacing the existing inverter and the other has not yet discovered that it needs to. Ask each installer directly which assumption they have made.
What Crown Solar installs here
The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range. On the local record Jinko Solar is the panel on the Mount Annan roofs on file, from the earlier years of this work. That distinction is worth having if you are comparing a quote today against what a neighbour had fitted: the panel on your quote is the current one, not the one on their roof. Crown Solar also installs JA Solar, AE Solar and LONGi panels.
Inverters and storage
GoodWe and FoxESS account for the recorded inverters on the Mount Annan jobs, with FoxESS on the storage side of the record.
Crown Solar also installs Sungrow, Fronius and SAJ inverters, and Tesla Powerwall, Sigenergy and AlphaESS batteries. Which one suits depends on whether you want whole-home backup, whether you expect to expand later, and whether you intend to join a virtual power plant. On a retrofit the existing inverter narrows that field before any of them are discussed. Those are the current range, available on any job, not a list of what has been fitted locally.
Talk to Crown Solar about your Mount Annan home
Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.
For a quote on a Mount Annan address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form.
Get it in writing for your Mount Annan address
Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.
Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?