Solar and battery installation in Schofields
Every Crown Solar job on the Schofields record is a battery added to a roof that already had panels. Postcode 2762 is in neither of Endeavour's first two export stages.
Solar in Schofields: a suburb buying batteries, not panels
Schofields accounts for seven completed Crown Solar installations, and the record here is the most one-sided on this site. Every Schofields job where the system type was recorded is a battery-only installation. Storage added to a property that already had panels on the roof.
Not one is a new solar system. In a suburb of this size that is unlikely to be coincidence. Schofields sits in the North West Growth Area and much of its housing went up in a concentrated period, with solar commonly fitted at or soon after handover. Those households are now far enough in to know what their system produces, what they export and what they pay for in the evening, and they are completing the system rather than starting one.
That makes this page mostly about retrofits, and about the one question that decides whether a retrofit is straightforward or expensive.
The question that decides a Schofields battery quote
Adding a battery is treated as an upgrade to the system. An upgrade brings the connection under the requirements applying when the application is made, not the ones that applied when the panels went on. Those requirements include a CSIP-AUS approved inverter listed on the Clean Energy Council website, an active internet connection, and net export metering configured for the solar inverter.
So the inverter already on your roof decides most of the cost. If it is CSIP-AUS approved and battery-capable, the battery is an addition. If it is not, the battery is a replacement plus an addition, and the difference is substantial.
This is also the single most common reason one Schofields retrofit quote looks cheaper than another: one company has priced the inverter and the other has not yet discovered that it needs to. Before you compare a single quote, establish three facts. The make and model of your inverter, its age, and whether it is battery-capable. Where the original system came from a builder or a volume supplier at handover the paperwork is often thin, so this may mean reading the label on the unit rather than the file.
Your grid connection: Endeavour Energy, postcode 2762
Schofields is in the Endeavour Energy distribution area. Endeavour approves the connection and sets the export limit for the property. Your retailer does neither, which is why two neighbours on different retail plans face identical connection rules.
Where 2762 sits in Endeavour's rollout
Endeavour stages flexible exports by postcode, not by council.
-
Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions.
-
Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area. Postcode 2762 is in this stage
-
Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address.
What you may export, by connection type
Endeavour Energy, kilowatts per phase.
Flexible exports have not reached 2762 yet
Postcode 2762 appears in neither of Endeavour's first two rollout stages. It is not in the first stage, which commenced 2 November 2026 and covered postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions, and it is not in the second stage commencing 30 November 2026.
This is worth knowing in Schofields specifically, because neighbouring north-west postcodes are not in the same position. Marsden Park and Melonba in 2765 are named in the second stage and move on 30 November 2026. Schofields is a few minutes away and is not. Both suburbs are in Blacktown City Council.
Endeavour's published availability plan lists a third phase in February 2027, and its rollout map is the tool that gives the date for a specific address. This page states no date for 2762 beyond that, because Endeavour has not published a third stage postcode list and a guessed date is worse than no date on a page someone might plan around.
Until the rollout reaches your postcode, the arrangement available is the existing one, with the fixed export limits that go with it. When flexible exports do apply, the allowance is up to 10kW per phase most of the time, reduced only when local network conditions require it, with Endeavour's Fixed Exports plan capped at a maximum export of 1.5kW as the opt-out.
The NSW CER Installer Portal and the emergency backstop
The NSW CER Installer Portal is becoming mandatory for all new and upgraded consumer energy resource systems, so that they are emergency backstop enabled and able to communicate over the internet with network utility servers. It is introduced across NSW in stages by postcode, in step with the export changes.
The emergency backstop mechanism allows the network to curtail exports when more solar is being exported than the grid can absorb. Endeavour describes it as a last resort expected to be used rarely and briefly. Since a battery retrofit is an upgrade, the equipment has to be able to comply, which is the same point as the inverter question above, arriving from a different direction.
What Schofields properties mean for system design
Schofields is genuinely two kinds of suburb under one name, and the difference matters.
The new estate housing. Most of the suburb's growth is recent: compact lots, modern switchboards, well-defined roof planes and, on some lots, three-phase supply. These are straightforward properties, and for a battery retrofit the switchboard is usually adequate. The constraint on any added panels is roof area rather than condition.
The older acreage. Schofields retains pockets of larger, older holdings from before the growth area was released. On those the picture is different: sheds and sub-boards, longer cable runs, switchboards of an older vintage, and sometimes an inverter position a long way from the router. Since flexible exports require an active internet connection at the inverter, that last point is worth checking at the site assessment rather than at commissioning.
Shading on small lots. Where houses sit close together, a two-storey neighbour is a real design input, and winter shading is materially worse than summer shading. A layout designed against a summer visit alone will underperform for part of the year.
Batteries in Schofields
Since storage is all this suburb's record contains, it is worth being precise about sizing.
A battery is sized against evening and overnight consumption, not against the size of the array. In Schofields you are in an unusually good position to answer that, because you already have a year or more of real data showing what your solar produced and what you exported. That is a far better basis than a projection, and it is the reason a retrofit quote here should be more precise than a new-system quote anywhere.
Where the local record shows large storage, it is on properties with the load to use it. A smaller battery that is actually cycled every day is a better outcome than a large one that is rarely emptied. Oversized storage is an expensive way to feel prepared.
The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here that would be out of date within months.
Approvals: Blacktown City Council and the NSW planning rules
Schofields is in the Blacktown City Council area. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.
The exemption applies only where every condition is satisfied, including a capacity limit and a restriction on panels facing the street. Where a proposal falls outside those conditions, development consent is required instead. Site-specific overlays such as bushfire-prone land are checked separately against council mapping, which matters more on the older acreage pockets than in the estates. Crown Solar checks the lot before the quote is finalised.
What the installation actually involves
Site assessment. For a retrofit, the make, model and age of the existing inverter comes first, along with the condition of the existing array. Then switchboard capacity, meter position, and where the battery can be sited.
Design and quote. Battery selection and sizing against your own consumption, any inverter replacement, any switchboard work, and which export arrangement the connection will fall under.
Connection application to Endeavour Energy. Nothing is installed before the Permission To Connect letter arrives.
Installation. A straightforward battery addition is usually a day. A retrofit involving an inverter replacement and switchboard work runs longer.
Commissioning, metering and handover paperwork.
Find out what your roof can carry
The design starts with your roof and your own bill, not with a number over the phone.
Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.
Common questions about solar in Schofields
Why is Marsden Park ahead of me?
Because the rollout is sequenced by postcode rather than by council. 2765 is named in the second stage and moves on 30 November 2026; 2762 is in neither published stage, and Endeavour's availability plan puts its third phase in February 2027.
My solar came with the house. Is it too old for a battery?
Rarely too old to be worth doing, but often old enough that the inverter needs attention. Whether it is CSIP-AUS approved and battery-capable is what decides, and both are checked before anything is quoted.
Should I add panels at the same time?
Sometimes it makes sense, particularly if the original array was sized small. It is assessed alongside the battery rather than assumed either way, and on a compact estate roof the limit is the space available.
What Crown Solar installs here
Three of the seven Schofields jobs carry a recorded system size, the largest at 13.2kW. No median is published, because three records cannot support one, and in a suburb where the work is overwhelmingly storage the array size is not the number that decides your quote anyway.
The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range, which is the sensible choice where panels are being added to a compact estate roof with limited space left. On the local record Jinko Solar appears on the Schofields roofs on file, from the earlier years of this work. Crown Solar also installs JA Solar, Jinko, AE Solar and LONGi panels.
Inverters and storage
FoxESS accounts for every recorded inverter and battery on the Schofields jobs. In a suburb where the work is almost entirely retrofit, that concentration is worth something practical: the retrofit question is usually whether a new battery and the existing inverter will work together, and that is a shorter conversation when the installer sees the same combination repeatedly.
Crown Solar also installs Sungrow, Fronius, GoodWe and SAJ inverters, and Tesla Powerwall, Sigenergy and AlphaESS batteries. Which one suits depends on whether you want whole-home backup, whether you expect to expand later, and whether you intend to join a virtual power plant, and those are three genuinely different conversations rather than three names for the same product. It is worth confirming that whoever quotes you has specified a pairing they have actually commissioned together rather than two products that merely appear compatible on paper. Those are the current range, available on any job, not a list of what has been fitted locally.
Talk to Crown Solar about your Schofields property
Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.
For a quote on a Schofields address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form.
Get it in writing for your Schofields address
Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.
Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?