Solar and battery installation in Smithfield

The Smithfield record contains all three ways of buying solar and storage: both at once, a battery added later, and solar alone. This page sets out which order suits which household.

Solar in Smithfield: three ways of buying the same thing

Smithfield accounts for four completed Crown Solar installations. Where a system size is recorded, both figures are 8.8kW. Two identical numbers, which usually means a common package rather than two separate designs arriving at the same answer. Two records are not a local figure and this page does not present them as one.

What the Smithfield record does contain, unusually, is all three ways of buying solar and storage: solar and a battery fitted together, a battery added to a house that already had panels, and solar on its own. Most suburbs on this site show one pattern. Smithfield shows the full set, which makes it the right page to set out which order suits which household.

Smithfield sits in the Fairfield City Council area on postcode 2164, which it shares with Wetherill Park and a substantial industrial estate.

4completed Crown Solar installations in Smithfield
February 2027Endeavour's published phase for postcode 2164, month only

Both at once, solar first, or battery later

Both at once is usually cheaper for the work involved. One site visit, one design, one connection application to Endeavour, one commissioning, one switchboard upgrade if the board needs it, and, the important part, an inverter chosen for storage from the start rather than replaced later. Scaffolding, access and a crew on site are costs that do not halve when the job is split in two.

Solar first is the right call when cash flow decides it, and that is a legitimate reason rather than a lesser one. Solar reduces the bill from the day it is commissioned; a battery cannot do anything without generation to store. So if you can only do one now, do this one.

But if you do, the inverter is the decision that matters. Specify one that is CSIP-AUS approved, battery-capable, and with capacity headroom for the storage you expect to add, and get all three stated on the quote. That single choice is what makes a later battery an addition rather than a replacement plus an addition. A cheaper inverter that closes the door is an easy saving for an installer to make on your behalf, and you will not notice until the day you ask for a battery.

Battery to an existing system is the most variable of the three. If the inverter already on your wall is CSIP-AUS approved, battery-capable, has the capacity and has service life left, the retrofit is straightforward. If any of those fails, the inverter is replaced as part of the job. That is why two retrofit quotes can differ by thousands, and why the make and model on your wall is the first thing to establish rather than the last.

What none of the three changes. The sizing logic. The array is sized against daytime consumption plus whatever you can usefully export; the battery is sized against evening and overnight consumption. Those are two different numbers from the same twelve months of data, and they do not become one number because the two products arrive on the same truck.

Your grid connection: Endeavour Energy, postcode 2164

Smithfield is in the Endeavour Energy distribution area. The Smithfield jobs on Crown Solar's record that carry a meter identifier show Endeavour network prefixes. Endeavour approves the connection and sets the export limit. Your electricity retailer does neither.

Where 2164 sits in Endeavour's rollout

Endeavour stages flexible exports by postcode, not by council.

  1. Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions.
  2. Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
  3. Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address. Postcode 2164 is in this stage

What you may export, by connection type

Endeavour Energy, kilowatts per phase.

Export allowance by connection type A flexible export connection allows up to 10kW per phase most of the time. The Fixed Exports opt-out allows a maximum of 1.5kW. Flexible export 10kW Fixed export 1.5kW
A flexible export connection allows up to 10kW per phase, most of the time. The network reduces that only when local grid conditions require it. The Fixed Exports opt-out allows a maximum of 1.5kW. Both carry the same connection requirements.

Flexible exports reach 2164 in the February 2027 phase

Endeavour has published two rollout stages by postcode. The first commenced on 2 November 2026, covering postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. The second commences on 30 November 2026 and adds a long list of Blue Mountains, Penrith, Hawkesbury and Illawarra postcodes. 2164 appears in neither, which places Smithfield in the February 2027 phase of Endeavour's availability plan. Endeavour has published the month, not a date within it, so this page gives the month and nothing more precise. Treat any quote that names a specific February day for 2164 as unsourced.

When it applies, a flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions require it. The opt-out is Endeavour's Fixed Exports plan with a maximum export of 1.5kW. Until the rollout reaches 2164, an application submitted and approved under the existing process carries a fixed export limit, and that position should appear on your quote in writing.

This is the clearest argument for including storage rather than waiting. With exports capped until February, a solar-plus-battery system is far less affected than an export-heavy array, because storage is about using your own generation rather than sending it out.

What your system has to meet

Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.

The emergency backstop mechanism allows the network to curtail exports when the grid cannot absorb what is being sent into it. Endeavour describes it as a last resort, expected to be used rarely and for short periods.

What Smithfield properties mean for system design

Established housing, so switchboard age is the recurring cost, and on a combined job it is also the opportunity, because it is priced once inside a single project rather than twice across two. A board of this era frequently needs replacement or upgrade before a battery, in capacity, protective devices and physical space. It is assessed and priced before you sign rather than raised on installation day.

Rooftop solar panels on a home in New South Wales
Illustrative. The usable north and west area is normally smaller than the roof looks from the street.

Asbestos in a pre-1990 house is a constraint to plan for. Bonded asbestos cement sheeting was used in Australian housing until the late 1980s, including eaves linings and meter box backing boards. Where it is present it changes how cable is run and who may do that work. The eaves and meter box are inspected during the assessment rather than discovered with a drill.

Roof condition decides the sequence. Where a roof is close to needing replacement or significant repair, doing that first and the solar second is cheaper than paying to remove and refit an array later. On a combined solar-and-battery project that question should be settled at quote stage, because the whole job depends on it.

Usable faces, not total roof area. The north and west area that can carry panels is normally smaller than the roof appears.

Heat, because this is western Sydney. Panels are rated at a cell temperature of 25°C and output falls as the cell rises above it, and inverters reduce their own output when they overheat. Battery siting matters for the same reason: storage has an operating temperature range and a preferred one, and both performance and service life suffer at the top of it. A hot unventilated garage is a decision with consequences.

Winter shading from mature planting. A tree that casts nothing on the roof in January can cover a significant part of an array at nine in the morning in June, because the sun is roughly thirty degrees lower. Shading is assessed for the winter sun path rather than from how the roof looks on the day of the visit.

And if the roof is a factory unit rather than a house, it is a different job. Assessed for structural capacity and wind loading, usually three-phase, and potentially outside exempt development. The industrial estate on this postcode is substantial, and the commercial team handles it.

Sizing a combined system

Two separate answers from the same data.

The array is sized against daytime consumption plus whatever you can usefully export, which until February 2027 is capped here.

The battery is sized against evening and overnight consumption, not against the size of the array. A smaller battery that is actually cycled every day beats a large one that is rarely emptied.

The split comes from your interval data where you have it. Many retailers provide it on request or through an online portal, and a smart meter makes the daytime and after-dark shares precise rather than estimated. Without it the installer is guessing, and you are entitled to ask which it is.

Decide what backup means to you before the equipment is chosen. Whole-home backup, a nominated essential circuit, or no backup at all are three different specifications at three different prices, and no backup is the default unless someone specifies otherwise.

The federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.

Approvals: Fairfield City Council and the NSW planning rules

Smithfield falls within Fairfield City Council. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.

The exemption is conditional, with a capacity limit and a restriction on panels facing the street among the conditions, and a proposal that does not meet every one of them requires development consent instead. A commercial-scale array on the industrial land can fall outside it on the capacity limit alone. For lots toward the creek lines the flood position is worth establishing from council mapping as well. Crown Solar checks the lot before the quote is finalised.

What the installation actually involves

  1. Which of the three orders you are in. Both at once, solar now with a battery later, or a battery to an existing system, because it changes what has to be checked first.

  2. The existing inverter, if there is one. Make, model, age, CSIP-AUS status and battery capability, named on the quote.

  3. Twelve months of consumption. Split between daytime and after dark, because that split sizes the array and the battery separately.

  4. Site assessment. Roof material, condition and usable faces, winter shading, and positions for inverter and battery chosen for temperature and ventilation as well as cable run.

  5. Switchboard, meter box and eaves. Condition, capacity, and whether pre-1990 sheeting is present.

  6. Design and quote. Array and battery stated separately, inverter headroom stated if a battery comes later, and the export arrangement for the February 2027 phase.

  7. Connection application to Endeavour Energy. Nothing is installed before approval.

  8. Commissioning, metering and handover paperwork.

Find out what your roof can carry

The design starts with your roof and your own bill, not with a number over the phone.

Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.

Common questions about solar in Smithfield

Should I wait for February 2027?

Generally not, and where a battery is part of the system it matters less again. What you should insist on is the arrangement being stated in writing on the quote.

Both local systems are 8.8kW. Is that the Smithfield answer?

It is the figure two households bought. Identical numbers across different houses usually reflect a standard package built around a common inverter size rather than two designs landing in the same place. Yours comes from your bills and your roof.

What should I ask every installer who quotes me?

Whether the inverter is CSIP-AUS approved and battery-capable and what size battery it will support, what daytime and overnight figures the array and battery were sized from, whether the switchboard was inspected and priced, and what export arrangement applies in writing.

What Crown Solar installs here

The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range. On the local record Jinko Solar and AE Solar panels appear on the Smithfield roofs on file, from the earlier years of this work. That distinction is worth having if you are comparing a quote today against what a neighbour had fitted: the panel on your quote is the current one, not the one on their roof. Crown Solar also installs JA Solar, AE Solar and LONGi panels.

Inverters and storage

FoxESS accounts for most of the recorded inverters and batteries on the Smithfield jobs.

Crown Solar also installs Sungrow, Fronius, GoodWe and SAJ inverters, and Tesla Powerwall, Sigenergy and AlphaESS batteries. Where both halves are bought together the choice is made with the design rather than after it, which is part of why the combined approach works out better. Those are the current range, available on any job, not a list of what has been fitted locally.

Talk to Crown Solar about your Smithfield property

Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.

For a house at a Smithfield address, call 1800 38 50 38, email info@crownsolar.com.au, or use the contact form. For a factory or warehouse roof in the industrial estate, commercial@crownsolar.com.au reaches the commercial team.

Get it in writing for your Smithfield address

Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.

Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?

Want this checked against your own roof and bill?

Get a free, no-obligation quote