Solar and battery installation in Yennora

Yennora is a distribution and warehousing estate, and the two largest systems Crown Solar has installed anywhere are here, both at 52.4kW on commercial tin roofs.

Solar in Yennora: the two largest systems on this site

Yennora accounts for three completed Crown Solar installations, and the recorded sizes are 24.9kW, 52.4kW and 52.4kW. The two at 52.4kW are the largest systems Crown Solar has installed anywhere on this record, and both are on commercial sheet-metal roofs.

That is because of what Yennora is. The suburb is a warehousing and distribution estate in the Cumberland City Council area, built around rail freight and an intermodal terminal, with large-format industrial buildings along Byron Road, Pine Road, Dennistoun Avenue and the surrounding streets. New warehouse and distribution approvals here run to tens of thousands of square metres, and several operate 24 hours a day, seven days a week.

So this page is written for a business, not a household. If you are looking for a house in this postcode, Guildford shares 2161 and that page covers residential work. Same network, same export date, completely different job.

3completed Crown Solar installations in Yennora
February 2027Endeavour's published phase for postcode 2161, month only

Your grid connection: Endeavour Energy, postcode 2161

Yennora is in the Endeavour Energy distribution area. Endeavour approves the connection and sets the export limit. Your electricity retailer does neither.

Where 2161 sits in Endeavour's rollout

Endeavour stages flexible exports by postcode, not by council.

  1. Stage 1, commenced 2 November 2026 Postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions.
  2. Stage 2, commences 30 November 2026 A further set of postcodes across Endeavour's area.
  3. Phase 3, February 2027 Endeavour has published the month and not a day within it. Its rollout map gives the date for a specific address. Postcode 2161 is in this stage

What you may export, by connection type

Endeavour Energy, kilowatts per phase.

Export allowance by connection type A flexible export connection allows up to 10kW per phase most of the time. The Fixed Exports opt-out allows a maximum of 1.5kW. Flexible export 10kW Fixed export 1.5kW
A flexible export connection allows up to 10kW per phase, most of the time. The network reduces that only when local grid conditions require it. The Fixed Exports opt-out allows a maximum of 1.5kW. Both carry the same connection requirements.

Flexible exports reach 2161 in the February 2027 phase

Endeavour has published two rollout stages by postcode. The first commenced on 2 November 2026, covering postcodes in and around the Campbelltown, Camden, Picton and Liverpool regions. The second commences on 30 November 2026 and adds a long list of Blue Mountains, Penrith, Hawkesbury and Illawarra postcodes. 2161 appears in neither, which places Yennora in the February 2027 phase of Endeavour's availability plan. Endeavour has published the month, not a date within it, so this page gives the month and nothing more precise.

When it applies, a flexible export connection allows up to 10kW per phase to be exported most of the time, reduced only when local grid conditions require it. The opt-out is Endeavour's Fixed Exports plan with a maximum export of 1.5kW.

On a three-phase industrial supply the per-phase basis is the whole arithmetic, and it is the first thing to establish before anyone quotes an export figure. It is also the reason a 52kW array on a factory unit is a workable proposition where the same array on a single-phase house would not be.

Approval thresholds bite at this scale

Endeavour requires an address in its network area, an active internet connection by Wi-Fi or cable, net export metering configured for the solar inverter, and a CSIP-AUS approved inverter listed on the Clean Energy Council website.

Beyond that, streamlined approval pathways apply up to certain inverter capacity thresholds, and above those a proposal can require a more detailed network assessment, which takes longer and may carry a cost. At 50kW and above this is a live question, not a footnote, and the timeline belongs in the project plan from the start. On a commercial job the delay normally costs more than the assessment.

The emergency backstop mechanism allows the network to curtail exports when the grid cannot absorb what is being sent into it. Endeavour describes it as a last resort, expected to be used rarely and for short periods.

What a Yennora industrial roof means for design

Structure comes before layout, and on a big roof it comes a long way before. A commercial roof is assessed for its structural capacity to carry the array and for the wind loading at the site, not simply for its area. Purlin spacing, sheet thickness and condition, and the existing fixings all decide what can be mounted and how it is attached. On a 50kW array spread across a large plane, that assessment is the difference between a system that lasts and a warranty argument.

Large simple planes are why these systems are large. A warehouse roof is usually one or two big shallow planes with no shading from the building's own form, which gives a clean layout and efficient string design. It is the single biggest advantage a commercial roof has over a house.

Shallow pitch has two consequences. Output is flatter across the year than on a steeper roof, and panels self-clean less effectively in rain. On an estate with heavy vehicle movements and rail freight alongside, soiling is real and access for cleaning is worth designing in rather than retrofitting.

Roof penetrations on a leased building are a commercial question. Any mounting system that penetrates sheeting touches the landlord's asset and the building's weatherproofing warranty. Non-penetrating and clamped systems exist for standing-seam and some other profiles. Which is appropriate depends on the profile and the structure, and it should be specified rather than left to the installer's habit.

Switchboard capacity and space. On an older unit the main switchboard is frequently the item that sets the budget, both for capacity and for physical room to add protection. It is assessed before a figure is quoted.

Storage on a commercial site: when it actually pays

On most industrial roofs a battery is the wrong purchase, because consumption happens while the array is producing. Plant, compressors, lighting and refrigeration run through the working day, so generation is consumed as it is made and storage adds capital without adding use.

Yennora is one of the places where that general rule needs testing rather than repeating, because a meaningful share of the estate runs extended or round-the-clock operations. Three specific cases change the answer:

A genuine night shift. If a site draws significant load after dark, stored generation displaces grid energy at the rate you would otherwise pay, and the case can be strong.

A demand charge on the tariff. Many commercial tariffs bill on peak demand as well as consumption. A battery that shaves the peak can be worth more than one that shifts energy, and that is an arithmetic question answered from the bill and the interval data, not from a rule of thumb.

A process that must not stop. Cold storage, a production line or critical IT all give a reason for backup that has nothing to do with bill savings. That is a specification, and whether the battery and inverter can carry the starting load is a technical answer rather than a hopeful one.

Absent one of those, the honest recommendation on an industrial roof is a larger array and no battery. Where storage is justified, the federal battery discount is applied by the installer at the point of sale through the small-scale certificate mechanism, and the rate steps down over time. Crown Solar sets out the figure applying to your quote in writing rather than publishing one here.

Approvals: Cumberland City Council and the NSW planning rules

Yennora falls within Cumberland City Council. For most rooftop installations the council is not the approval authority, because most rooftop solar in NSW is exempt development under State Environmental Planning Policy (Transport and Infrastructure) 2021 and requires no development application.

The condition that matters at this scale is the capacity limit. A commercial-scale array can fall outside the exemption and require development consent, which is a different timeline and cost. On an industrial lot there may also be conditions attached to the building's own development consent, and on this estate a number of properties sit under major project or planning panel approvals with their own conditions. Both are checked against the property and the proposal before the quote is finalised, rather than assumed from the fact that rooftop solar is usually exempt.

What the installation actually involves

Rooftop solar panels on a home in New South Wales
Illustrative. The usable north and west area is normally smaller than the roof looks from the street.
  1. Ownership and authority. On a leased unit, the landlord's consent, the position on roof penetrations, and an agreement on who funds the system and who keeps the benefit.

  2. Load profile. Interval data across a full year, which establishes the daytime base load, any night shift, and whether the tariff carries a demand charge.

  3. Structural assessment of the roof. Capacity, purlin spacing, sheet profile and condition, fixings and wind loading at the site.

  4. Supply and switchboard. Phase arrangement, main switchboard capacity and available space.

  5. Approval pathway. Whether the proposal stays inside exempt development, any conditions on the building's existing consent, and which Endeavour assessment pathway the inverter capacity triggers.

  6. Design and quote. Layout, string design, mounting system specified for the roof profile, the per-phase export position for February 2027, and storage only where a specific reason supports it.

  7. Connection application to Endeavour Energy. Nothing is installed before approval.

  8. Commissioning, metering and handover paperwork.

Find out what your roof can carry

The design starts with your roof and your own bill, not with a number over the phone.

Crown Solar does not quote off a template or over the phone. Every design is built on your own site data.

Common questions about solar in Yennora

Should I wait for February 2027?

On a commercial site, almost certainly not. The value is in self-consumption during operating hours, and the export limit barely touches it. What you should insist on is the arrangement being stated in writing on the quote.

Is 52kW about the ceiling for a unit like mine?

No, it is about where the record happens to sit. Larger is possible on a larger roof with the supply capacity and the approval pathway to match. What decides it is your interval data, your roof's structural capacity and the network assessment, in that order.

What should I ask every installer who quotes me?

Whether the roof's structural capacity and wind loading have been assessed and by whom, what mounting system is proposed for your roof profile and whether it penetrates the sheeting, which Endeavour approval pathway the inverter capacity triggers and how long it takes, and what export arrangement applies in writing.

What Crown Solar installs here

The panel Crown Solar is currently installing is Trina Solar, fitted as the high-wattage Vertex range. On the local record JA Solar is the panel on all three Yennora roofs on file, from the earlier years of this work. Crown Solar also installs Jinko Solar, AE Solar and LONGi panels.

Inverters and storage

GoodWe appears on the recorded Yennora inverters. No battery is recorded on any of the three jobs, which is consistent with daytime industrial load.

Crown Solar also installs FoxESS, Sungrow, Fronius and SAJ inverters, and Tesla Powerwall, Sigenergy and AlphaESS batteries. On a commercial system the inverter choice is driven first by capacity, phase arrangement and the approval threshold, and only then by preference. Those are the current range, available on any job, not a list of what has been fitted locally.

Talk to Crown Solar about your Yennora site

Crown Solar is a NSW electrical contractor, licence 378172C, and a New Energy Tech Approved Seller. The office is at 3B/4 Louise Avenue, Ingleburn, and is open Mon–Fri 9am–5pm.

For a commercial or industrial roof at a Yennora address, email commercial@crownsolar.com.au or call 1800 38 50 38. For a home, use info@crownsolar.com.au or the contact form.

Get it in writing for your Yennora address

Send the address and your last four quarterly bills. You get a system size, the roof faces it sits on, the export arrangement, and the price. All in writing.

Prefer email? info@crownsolar.com.au. One question to start with: what is your place using in a quarter?

Want this checked against your own roof and bill?

Get a free, no-obligation quote